Custom Chrome Catalogue

WHEELS, TIRES & BRAKES

Disc Hub Spacer Kits for Fork Conversion Kits These kits may be purchased as replacement parts for the spacers included in the Custom Chrome fork conversion kits or for use on dual disc models that the kits don’t cover. For example on a 90 FXRS Sport Edition with a CC #13032 conversion kit the hub spacer works with the second disc rotor. 13156 Fits conversion kit (CC

APPAREL

1.125

.750

SEATS & BAGS

19720

1.125"

.750"

.750"

19584

FOOT CONTROLS

.44"

1.25"

#13032) for 39 mm Showa forks on models from 87-99 (1 7/16"- thick) Fits conversion kit (CC #13039) for 35 mm Showa front forks on models from 84-87 (1 11/16"-thick) Fits conversion kit (CC #13040) for 35 mm Showa front forks on dual disc models from 77-83 (1 5/8"-thick)

.750"

HAND CONTROLS

19585

13157

1.130"

.760"

.38"

13158

19696

LIGHTING

Chrome Hub Bearing Support Provides additional support for extra wide rear wheel applications. By adding an extra bearing on the outside of the pulley you reduce the load on the axle and left-side bearing. Installs between the pulley and swingarm. A must for large displacement or high-performance motors when used in wide 180, 200, 230 and 250 frames. Fits most custom applications. 26169 Complete bearing support Billet aluminum spacers permit custom alignment of rear wheel pulleys or sprock- ets. Can be used with many wide rear tire kits and frames. 84-99. Natural Aluminum Finish 42691 .250"-thick 42692 .375"-thick 42693 .500"-thick 42694 .750"-thick Rear Wheel Sprocket and Pulley Spacers

.645"

1.105"

.757"

ELECTRICAL

19697

1.125"

.750"

.50"

19721

EXHAUST

.750"

1.125"

.750"

19682

INTAKE

1.125"

.750"

.750"

19594

ENGINE

.30"

1.125"

.750"

19714

GASKETS

1.125"

.750"

.465"

19719

TRANSMISSION & CLUTCH

1.125"

.750"

1.250"

19999

DRIVELINE

1.000"

Axle and Wheel Spacers A wide selection of replacements for Original Equipment spacers on the front or rear wheels of many models from 73-03. The following listing is in OEM number order. 19719 Repl. OEM 40910-84A (sold each) 19682 Outer bearing spacers (repl. OEM 41196-73) sold in pairs

WHEELS TIRES & BRAKES

CHASSIS

19721 56245 19696 56243 19488 56244 19550 19697 19585 19714 19584 19594 19720 19999

Repl. OEM 41196-83 (sold each) Repl. OEM 41592-79 (sold each) Repl. OEM 41594-73 (pack of 5) Repl. OEM 41595-73 (sold each)

FXSTD Deuce 180mm Fat Tire Kit by Vulcan Engineering This simple kit allows you to run a 180mm tire on your 00-07 Deuce with no modifications to the frame or wheel. Kit includes a pulley spacer and alignment spindle. Easy install that can be done at your next rear tire change! 668253 180 mm tire conversion for 00-07 FXSTD Deuce models

SHEETMETAL

Chrome – Repl. OEM 41595-73 (pack of 5)

Repl. OEM 41595-86 (sold each)

Chrome – Repl. OEM 41595-86 (pack of 5)

INSTRUMENTS & GAUGES

Repl. OEM 41607-83 (pack of 5)

Right bearing spacer (repl. OEM 43358-83)

Disc Rotor Spacer .040"-thick spacer is used to re-establish correct rotor-to-caliper alignment and spacing whenever servicing wheels, brake calipers, supports or rotors on Original Equipment disc brake systems from 73-84. Sold each 25635 Replaces OEM 41814-76

Repl. OEM 43488-77 (sold each) Repl. OEM 43548-73 (sold each)

GENERAL

Left bearing spacer (repl. OEM 43548-74) Repl. OEM 43654-86A (sold each) Chrome – Repl. OEM 43657-89 (pack of 5)

CROSS REFERENCE

www.cus tomchrome.com

12.35