Custom Chrome Catalogue

CHASSIS

28528

Burly ‘Adjust-A-Ride’ Kits for Softail Models Fully adjustable versions of the popular ‘Lowboy’ lowering kits which don’t require any cutting, grinding, or irreversible modifications and can be installed in an hour. Permits the ride height to be adjusted up to 2" lower or raised from the stock height by 1/2" in minutes with a 3/4" wrench. They feature sealed heim joint bearings that require very little maintenance.

‘Burly’ Rear Lowering Kits Bolt-on shock mounts that move shock mounting points further back and down, lowering the rear of your bike approximately 1" with no loss of wheel travel. Installation is easy, with no permanent modifications to your bike. All kits come with a black powdercoated finish and include instructions and all Fits all models from 02-08 (except FLHX and FLH RS) ���������������������������������$119.99 Fits all models from 09-14 (except FLHX, FLHXI, FLHRS models) �������������$129.99 Fits all models from 97-01 (except 98-01 Classic models), Black ���������������$105.99 Fits all models from 85-96, Black ���������������������������������������������������������������������$105.99 Fits 02-14 models �������������������������������������������������������������������������������������������������$129.99 Fits all models 00-01 �������������������������������������������������������������������������������������������$119.99 Fits all models from 91-99 (except FXDL and FXD Convertible with Original Equipment saddlebags), Black �������������������������������������������������������������������������$109.99 Fits all 05-14 models (except Low and Custom models) �����������������������������$109.99 Fits all 04 models (except Custom and Hugger models) �������������������������������$89.99 Fits all models from 00-03 (except Custom and Hugger models) ���������������$79.99 Fits all models from 86-96 (except Custom and Hugger models) �������������$104.99 Note: These lowering kits are not recommended to be installed on motorcycles equipped with lowered shocks. Lowering your motorcycle will reduce cornering clearance. This modification is intended for custom motorcycles. It is not recommended for motorcycles ridden on the streets or highways. All Burly lowering kits are made in the USA. 688962 07898 28522 641272 28528 28479 For Dyna Glide Models 640375 07912 07911 For Sportster Models 640381 necessary hardware. For Touring Models 640374

Fits all Softail Models from 84-88 Fit Original Equipment shocks only. 28477

Plain �����������������������������������������������������������������������$99.99

Fits all Softail Models from 89-99 Also fit the ‘American Tuned’ gas shocks from Progressive Suspension, Inc. 28478 Plain �����������������������������������������������������������������������$99.99

13

Adjustable Rear Shock Lowering Kits For Touring Models This adjustable rear shock lowering kit are engineered to lower the rear of your motorcycle up to 3” lower than stock. There are three 1” adjustment locations. Fully adjustable to get the exact ride height you want. Give your bike a tough, custom stance. Black powder coated harden steel construction. Includes all necessary hardware and instructions. Sold in pairs. 631427 Fits Touring models 02-Up (Except FLHX, FLHRS & FLHRC Road King models with stock OEM leather bags) ������������������������������������������������������ $30.99 Note: Lowering your motorcycle reduces cornering clearance. It is not recommended to use this kit with lowered shocks. Check all clearances after installing this kit.

Ness-Tech Lowering Kits for Softail Models Lowers the rear of Softail models up to two inches. Includes replacement shock studs, hardware and blue Loctite. 05992 Fits all Softail models from 00-14 ����������������������������������������������������������������������$69.99

*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity.

13.44

Please see Cautionary Information in back of catalog.

Made with FlippingBook HTML5