115326 WirthCo 2020_catalog (1)

CIRCUIT PROTECTION

FUSE TAPS FOR OCCUPIED SLOTS IN FUSE BLOCK •Taps Clip onto Existing Fuses to Provide an Additional Connection Point for Slip-On Terminals •A Tap Installed at "Cold" End of Fuse Slot is Protected by Existing Fuse •A Tap Installed at "Hot" End of Fuse Slot Requires Installation of Additional In-Line Fuse for New Circuit Direct Power

24 PIECE FUSE TAP KIT • 12 Volt Power Connector Kit

FUSE TAPS FOR ATO/ATC BLADE FUSES

#30001 Kit: 3 Taps, 6 Slip-On Terminals

#30001-7 Tap Only

PATENTED FUSE TAPS FOR ATM/MINI BLADE FUSES

Part #

Description

Qty

30001-7 30200-7 30300-7 30600-7

Fuse Tap Kits for ATO/ATC Fuses Fuse Tap Kits for AGC and SFE Fuses

2 2 2

Battery Bolt for Side Mount Terminal Batteries

Battery Bolt for Top Post Batteries 2 30700-7 Frame Ground Tap, Also Used as a Side Terminal "Triple Tap" 2 30703-7 Top Post "Triple Tap", Also Used as a Frame Ground 2 30800-7 Fuse Tap Kits for ATM/Mini Fuses 2 30870-7 Blue Terminals for 16-14 Gauge Wires 4 30873-7 Red Terminals for 22-18 Gauge Wire 4 30876-7 Yellow Terminals for 12-10 Gauge Wires 2 Total Pieces 24

#30800 Kit: 3 Taps, 6 Slip-On Terminals

#30800-7 Tap Only

FUSE TAPS FOR AGC ROUND GLASS FUSES

#30995

6 PIECE FUSE KIT • Includes 1 Piece Each: 5, 7.5, 10, 20, 25 and 30 Amp Fuses

#30200 Kit: 3 Taps, 6 Slip-On Terminals

#30200-7 Tap Only

TAPS FOR VACANT ENERGIZED SLOTS IN ATM/MINI-FUSE BLOCK • Provides tap for connecting slip-on terminal • Requires installation of in-line fuse for new circuit

#30903 – MidBlade™ (ATO/ATC Kit) #30913 – MinBlade™ (ATM/Mini Kit)

#30100 Kit: 3 Taps, 6 Slip-On Terminals

#30100-7 Tap Only

Phone: 952-941-9073 | www.wirthco.com

25

Made with FlippingBook Ebook Creator