Adhesive Dispensing Catalogue 2011

700 series barrels In five sizes and three colours

Barrels are manufactured from high-density polypropylene plastics and are designed for use with pneumatic dispensing systems up to 100-psi pressures. The wall thickness for these barrels is much thicker than a standard syringe to make it safer to use with any dispensing equipment. Barrels can be used with a wiper piston to provide a seal on the fluid level inside as well as wiping all fluid from the inside of the barrel as it moves down. A high quality barrel and piston will reduce drips and ooze after each deposit is made. A poor fit will waste material by allowing leaking in between dispense cycles. Luer lock barrels allow tips and fittings to be twisted on for a secure leak free fit. This is particularly important when dispensing fluids at high pressures. Standard clear barrels are used with most pastes, glues, adhesives, silicones, primers, gels and lubricants. Amber barrels are used for fluids that can be affected by UV light. Black barrels are for UV curable adhesives that must not be exposed to light. Our barrels are the most cost effective high quality products available.

Syringe barrel without pistons Natural

Light Block

Opaque

QTY (50) (40)

Clear Barrels 7030LL1NPK 7050LL1NPK 7100LL1NPK 7300LL1NPK 7550LL1NPK

Amber Barrels Black Barrels

3cc 5cc

7030LL1DPK 7050LL1DPK 7100LL1DPK 7300LL1DPK 7550LL1DPK

7030LL1BPK 7050LL1BPK 7100LL1BPK 7300LL1BPK

10cc (30) 30cc (20) 55cc (20)

7550LL1BPK Syringe barrel with white wiper pistons in a kit Natural Light Block Opaque QTY Clear Barrels Amber Barrels Black Barrels 3cc (50) 903-N 903-D 903-B 5cc (40) 905-N 905-D 903-B 10cc (30) 910-N 910-D 910-B 30cc (20) 930-N 930-D 930-B 55cc (20) 955-N 955-D 955-B Kits are supplied with the same number of barrels and pistons in the pack. Kits are also available with easy flow blue pistons or flat wall red pistons instead of standard white wiper pistons.

3

Made with FlippingBook Learn more on our blog