TITAN FLOW CONTROL CATALOG - 0219

CV41-0616

CHECKVALVE •WAFERTYPE • DUAL DISC MODEL: CV 41-DI (Ductile Iron Body)

TITAN FLOW CONTROL, Inc. 290 Corporate Drive E-mail: titan@titanfci.com Lumberton, NC 28358 Web: www.titanfci.com Tel: 910.735.0000 Fax: 910.738.3848

ANSI Class 150

TITAN

Buna-N,Viton, or EPDM Seats Stainless Steel or Bronze Discs

BILL OF MATERIALS (1)

7

No. PART

CV 41-DI (3)

6

5

1

Body

Ductile Iron ASTMA536

FLOW

2

Seat

Buna-N, Viton, or EPDM

4

3

Disc

Aluminum Bronze or Series 300 Stainless Steel

ØD

ØC

ØB

ØE

4

Series 300 Stainless Steel

Spring (2)

2

3

5

Shaft/Stop Pin Series 300 Stainless Steel

6

NPT Plug

Commercial Steel

1

7 Commercial Steel 1. Bill of Materials represents standard materials. Equivalent or better materials may be substituted at the manufacturer's discretion. Eye Bolt (4)

A

Class 300 Flange

6

Class 150 Flange

2. Denotes recommended spare parts. 3. Ductile Iron bodies are epoxy painted. 4. Eye Bolt is available on larger sizes only.

Outlet Side

TopView - Cutaway

CAD illustration is representative of sizes 2' through 6". Sizes 8" through 24" are not scalloped. Sizes 2" through 6" are designed for dual pressure service (ANSI Class 150 and 300).

Sizes 2" ~ 12"

Ductile IronApplication Notes: Ductile Iron maintains the anti-corrosive properties of Cast Iron while achieving a yield strength comparable to Carbon Steel. Ductile Iron also offers higher pressure/temperature ratings than Cast Iron. For example, Ductile Iron check valves (class 300 - sizes 2" ~ 24") are rated at 640 psiWOG. By comparison, Cast Iron check valves (class 250 - sizes 2" ~ 12") are rated at 500 psi WOG and (sizes 14" ~ 24") are only rated at 300 psiWOG. Ductile Iron ANSI Classes 150 and 300 have the same bolting pattern as Cast Iron ANSI Classes 125 and 250 respectively.

DIMENSIONS AND PERFORMANCE DATA (1)

2 2 1 / 2

3

4

5

6

8

10

12

14

16

18

20

24

in

SIZE

mm 50 65 80 100 125 150 200 250 300 350 400 450 500 600 in 2.12 2.12 2.25 2.50 2.75 3.00 3.75 4.25 5.62 7.25 7.50 8.00 8.37 8.75 mm 54 54 58 64 70 77 96 108 143 185 191 204 213 223 in 4.37 5.12 5.75 7.12 8.50 9.87 11.00 13.37 16.12 17.75 20.25 21.62 23.87 28.25 mm 111 131 146 181 216 251 280 340 410 451 515 550 607 718 in 2.00 2.50 3.00 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 24.00 mm 51 64 77 102 127 153 204 254 305 356 407 458 508 610 in 2.62 3.12 3.87 4.75 6.00 7.00 9.00 11.00 13.25 14.25 16.25 18.12 20.12 24.00 mm 67 80 98 121 152 178 229 280 337 362 413 461 512 610 in 0 1.26 2.36 3.425 4.567 5.315 7.48 9.45 11.26 11.26 13.70 15.63 17.638 21.97 mm 0 32 60 87 116 135 190 240 286 286 348 397 448 558 5.0 7.0 14.0 18.0 26.5 43.0 70.0 108.0 175.0 200.0 258.0 345.0 460.0 lb

A DIMENSION FACETO FACE (2)

ØB DIMENSION OUTLET OUTSIDE DIAMETER ØC DIMENSION INLET INSIDE DIAMETER ØD DIMENSION OUTLET INSIDE DIAMETER ØE DIMENSION MINIMUM BORE DIAMETER

4.0 1.8

ASSEMBLED WEIGHT

kg

2.3

3.2

6.3

8.2 12.0 19.5 31.7 48.9 79.4 90.7 117.0 156.5 208.7

C v 62 110 175 350 550 850 1500 2400 3700 5400 8250 10400 14200 23000 psi ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25

Flow Coefficient

Cracking Pressure (3)

1. Dimensions and weights are for reference only. When required, request certified drawings. 2. Face to face values have a tolerance of ±0.06 in (±2.0 mm) for sizes 10" and lower and a tolerance of ±0.12 in (±3.0 mm) for sizes 12" and larger. 3. Cracking pressure is for horizontal installations only. For vertical installations, please consult factory.

REFERENCED STANDARDS & CODES

CODE

DESCRIPTION

ANSI/API 594

Valve Design and Manufacture

PRESSURE -TEMPERATURE RATINGS (1)

ASME/ANSI 16.5

Flange Dimensions

Ductile Iron A536 ANSI Class 150 Ductile Iron A536ANSI Class 300

ASME/ANSI B16.34

Valves - Flanged,Threaded, andWelding End

250 °F MaxTemp Buna-N Seat

300 °F MaxTemp EPDM Seats

700

ASME/ANSI B16.42

Ductile Iron Pipe Flanges and Flanged Fittings

Source:ASMEB16.42-1998

400 °F MaxTemp Viton Seat

API 598

Valve Inspection and Pressure Test

Sizes 2” ~ 6” only

600

450 °F MaxTemp SS Spring

FMAPPROVALS CLASS 1230

Anti-Water Hammer CheckValves (2" ~12")

500

PRESSURE / TEMPERATURE RATING - ASTMA536

400

Body Material WOG (Non-shock) :

Class 150 (2" ~ 24") 250 PSI @ 100 °F

Class 300 (2" ~ 6") 640 PSI @ 100 °F

Pressure (PSI)

300

Sizes 2” ~ 24” only

SEATAND SPRINGTEMPERATURE RATING

200

Seat Material

Range Spring Material

Max

100

EPDM:

-30 ~ 300 °F Series 300 Stainless Steel:

450 °F

-50

50

150

250

350

450

550

650

Temperature ( °F)

BUNA-N:

-20 ~ 250 °F -40 ~ 400 °F

1. The above chart displays the pressure-temperature ratings for the valve's body material per ASME B16.42-1998. Max temperature limits have been added for seat and spring materials. Sizes 2" through 6" are dual pressure rated for both ANSI Class 150 and 300.

VITON:

Titan FCI makes every effort to ensure the information presented on our literature accurately reflects exact product specifications. However, as product changes occur, there may be short-term differences between actual product specifications and the information contained within our literature. Titan FCI reserves the right to make design and specification changes to improve our products without prior notification. When required, request certified drawings.