2018 Equipment & Parts Catalog

GASOLINE ENGINE DRIVEN CENTRIFUGAL PUMPS Consult the internet Selection Guide at www.AcePumps.com to determine which pump is right for you.

• Suction 1-½", discharge 1- ¼" • Max. pressure: 115 PSI • Max. flow: 110 GPM • Impeller attaches directly to ¾" keyed shaft on 5.5 hp engine • Large vent area between pump & engine • Optional electric start engine • Available complete or less engine Part No. GE-660-LE ............... Price: $787.91 Part No. GE-660-Honda....................... Call for Pricing Part No. GE-660-BRIGGS................. Price: $2,190.68

• Suction 2", discharge 1-½" • Max. pressure: 140 PSI • Max. flow: 140 GPM • Impeller attaches directly to 1" keyed shaft on 8-10 hp engines • Large vent area between pump & engine • Optional electric start engine • Available complete or less engine

PUMPS

Part No. GE-860-LE .................. Call for Pricing Part No. GE-860-HONDA ........ Call for Pricing

PERFORMANCE DATA CHART

Engine Shaft Speed

20 PSI GPM

40 PSI GPM

60 PSI GPM

80 PSI GPM

100 PSI GPM

120 PSI GPM

140 PSI GPM

3800 RPM 140 120 103 80 60 40 5 3400 RPM 140 120 95 70 32 — — 3000 RPM 140 110 70 15 — — —

BELT DRIVEN CENTRIFUGAL PUMPS

FRAME MOUNT ADVANTAGES Ace belt driven pumps are available in a variety of models which can be belt driven or direct cou- pled to a power source. The pumps are available in either clockwise or counterclockwise rotation. The standard bare shaft pumps are designed with a keyway for mounting a drive pulley or coupling.

KEY SHAFT DRIVEN

FMC-200

Max GPM

Max PSI

Est. Ship Weight

Description 1-¼" x 1" NPT 1-½" x 1-¼" NPT 2" x 1-½" NPT 2" x 1-½" NPT

Part No.

Price

70 130 80 100 200 120 180 170

18 lb 11 lb 24 lb 42 lb

FMC

668.86 675.00 889.77

FMC-CW-150 FMC-CW-200

FMC-CW-150

FMC-CW-800-DRB 1,816.36

FMC-CW-200

MAGNETIC CLUTCH DRIVEN ADVANTAGES The integral magnetic clutch driven centrifugal pump design enables the operator to free the PTO shaft and hydraulic system for other uses. The 12 volt DC magnetic clutch is driven by a v-belt from the engine drive shaft.The clutch is idle until engaged by an on-off toggle switch located at the driver’s seat.

MAGNETIC CLUTCH BELT DRIVEN

Max GPM

Max PSI

Est. Ship Weight

Description

Part No.

Price

1-¼" x 1" NPT 1-¼" x 1" NPT 1-½" x 1-¼" NPT 1-½" x 1-¼" NPT 220 x 200 flange 2" x 1-½" NPT

70 130 70 130 130 120 80 100 140 160 180 170

23 lb 23 lb 25 lb 25 lb 35 lb 45 lb

FMC-MAG-D

1,276.36

FMC-CW-MAG-D 1,276.36 FMC-150-MAG-D 1,282.50 FMC-CW-150-MAG-D 1,282.50 FMC-650-MAG-D 2,215.23 FMC-CW-800-MAGD 3,147.95

FMC-650-MAG-D

121