2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

Displays and settings

Specific LEDs on the display light up in the event of a malfunction. In this way you can narrow down the error and eliminate the potential cause yourself or contact our service department.

1. Battery charging state • All LEDs on = battery is fully charged • One LED flashes = battery is empty • As soon as the last LED flashes, the mo- tor is no longer supported, but the lighting and display are still working. 2. Motor support • 0 = No motor support (only lighting)

Your pedelec can be equipped with various displays and control units.

Control unit LED 300

• 1 = 25 % assistance • 2 = 50 % assistance • 3 = 75 % assistance • 4 = 100 % assistance

LED flash- es

Error description and solution

3. “+“-button • Press briefly = Increase motor support 4. “–“-button • Press briefly = Reduce motor support • Keep pressed = Activate pushing support 5. “Light” button • Press briefly = Switch lighting on/off 6. “On/Off” button • Keep pressed = Switch system on/off Error codes

1 Motor overloaded Solution: Reduce the strain (e.g. steep incline, high additional load or trailer). Pedal more strongly. If the motor has failed completely, it requires approximately 5 minutes of cool-down time. Also check that all visible motor connectors are 100% secure. If nothing works, contact our service hotline. 1+2 Motor or motor cable short-circuit 1 Solution: Check the cable to the motor for possible breakage. Contact our service hotline. 1+2+3 Communication error Solution: Detach the plug-in connec- tion of the display and attach it again. Repeat this step at least twice. If this does not help, contact our service hotline.

The LED display, a functional operating unit, is mounted next to the left handle. It shows all rel-

evant information with simple LEDs. Functional overview and operation

1

Always quote the error code when contacting our service department.

2

3

5

4

6

16