2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

Push assistance

Settings

This function is not available for pe- delecs with a central motor. Just change the gear on your gearbox to regulate the strength of the push assistance. Lower gear = Stronger push assistance. Start-up strength The start-up strength of the motor can be set to four levels: • 1 = 100 %

The pushing aid function works to assist you if you, for example, have to climb a steep ramp from an un- derground car park or underpass. Do not use it to ride the bike. The push assistance is not a start- up support! If you activate your push assistance under a load that is too heavy, your motor will start to jerk or even perform an emergency shut-down! The standard setting is “25”. This means that the motor is pushing with 25% of its total power. You can increase this value in steps of 1% to a maxi- mum of 50%. You can move on by using the “MODE” button.

Do NOT change the settings while riding your pedelec.

This LCD display offers you various personaliza- tion options. First, switch on the display by hold- ing down the “MODE” button on the operating unit. Hold down both arrow keys on the operating unit at the same time for approximately two sec- onds to get to the first menu level. You are now in the standard settings menu. Background lighting This is the first settings option. The number “1” flashes. You have a choice between: • 1 = Weak display lighting • 2 = Moderate display lighting • 3 = Bright display lighting Use the arrow keys to adjust the value as de- sired. You can move on by using the “MODE” button.

• 2 = 90 % • 3 = 80 % • 4 = 70 %

The default is level 1. Selecting a lower level has a positive effect on the range of the battery and its service life. Keep the “MODE” button pressed to leave the menu.

23