2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

Personal PIN The display is not removable and therefore ac- cessible to unauthorized persons. You can choose to set a 4-digit PIN that is required when switching on. After entering the PIN, confirm it by pressing the “MODE” button. You can now use your display in the usual way. Proceed as follows to get to the appropriate menu: Press both arrow buttons at the same time for approximately two seconds: Then keep the “MODE” and the up-arrow buttons pressed at the same time. A 4-digit PIN query appears. The standard PIN is 1234.

After activating the PINf query, you will be asked to specify a number. Confirm it afterwards with the “MODE” button.

Error No.

Error description and solution

Motor or motor cable short-circuit 1 Solution: Check the cable to the motor for possible breakage. Contact our service hotline. Communication error Solution: Detach the plug-in con- nection of the display and attach it again. Repeat this step at least twice. If this does not work, contact our service hotline.

23

Carefully secure or note your PIN! If you forget your PIN, you will require the help of a technician or a display exchange via parcel mail. This is not cov- ered by the warranty.

30

Error codes

Always quote the error code when contacting our service hotline.

LCD 800 display with control unit

Error No.

Error description and solution

Motor overloaded Solution: Reduce the load (e.g. steep incline, high additional load or trailer). Pedal more strongly. If the motor has failed completely, it requires approximately 5 minutes of cool-down time. Also check that all visible motor connectors are 100% secure. If nothing works, contact our service hotline.

21

You can now choose “N” for “no PIN” or “Y” for “yes, activate PIN”.

25