2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

rectly represented. You have a choice between 38-622 | 42-622 | 47-622 | 27.5″ | 47-559. The size of your wheel is shown on your tyre.

Starting with level 1 (see number in the middle), you will be asked how much support in % you want to get at the level shown. The bottom field shows a “from-to” recommen- dation. The setting is made in 1% steps and is in each case confirmed by pressing briefly on the “MODE” button, which moves you to the next level. This continues until the last level has been reached and confirmed.

Personal PIN The display is not removable and therefore ac- cessible to unauthorized persons. You can choose to set a 4-digit PIN that is required when switching on. After entering the PIN, confirm it by pressing the “MODE” button. You can now use your display in the usual way. Proceed as follows to get to the appropriate menu: Press both arrow buttons at the same time for approximately two seconds: Then keep the “MODE” and the up-arrow button pressed at the same time. A 4-digit PIN query appears. The standard PIN is 1234.

Battery voltage and capacity The correct battery voltage in Volt must be pro- vided to ensure that the battery charge display works correctly. You have a choice of 36 or 48 volts (the upper number flashes). The voltage of your battery is shown on the sticker attached to your battery among other places. When you have selected the voltage, confirm it with the “MODE” button.

This function is not available for pe- delecs with a central motor. These settings can unfortunately not be performed, due to the specific type of motor controller used. Wheel size The next parameter to select is the wheel size. This is required to ensure that the speed dis- played as well as the kilometres ridden are cor-

A selection of capacities is now automatically provided, depending on the battery voltage set. The same applies here: The battery capacity is specified in “Ah” and this value is also shown on the sticker of your battery. This setting is neces- sary to show the correct battery range on your display at a later time.

You can now choose “N” for “no PIN” or “Y” for “yes, activate PIN”.

28