2019_EN_FISCHER_SYSTEM_MANUAL_web[1]

Always quote the error code when contacting our service hotline.

Error No.

Error description and solution

Communication error Solution: Detach the plug-in con- nection of the display and attach it again. Repeat this step at least twice. If this does not work, contact our service hotline.

30

After activating the PIN query, you are request- ed to specify a number. Confirm it afterwards with the “MODE” button.

LCD 1300 display with control unit

Fault code prompt

Please carefully secure or note your PIN! If you forget your PIN, you will require the help of a technician or a display exchange via parcel mail. This is not covered by the warranty. Store your settings Hold the “MODE” button for 2 seconds to store the changed value. You are then leaving the set- tings menu and are back in the standard mode of the operating module. Error codes A code will be shown on the display if your pe- delec's system encounters an error. The error code will automatically disappear only once the problem has been remedied.

Error No.

Error description and solution

Motor overloaded Solution: Reduce the load (e.g. steep incline, high additional load or trailer). Pedal more strongly. If the motor has failed completely, it requires approximately 5 minutes of cool-down time. Also check that all visible motor connectors are 100% secure. If nothing works, contact our service hotline.

21

Control unit Functional overview and operation

Drive fault Contact our service hotline. Brake fault Contact our service hotline.

22, 23, 24

25

5 4 3

1

2

34