New-Tech Europe Magazine | Q3 2020

Co Components

New Products Automotive

IoT

IoT Computers Components Computers Electro Optic & Camera Packaging & Production Motion Automotive New Products Different interpretations The SMT ferrites referred to as “High Speed” have significantly lower impedances in the lower frequency range and therefore only low attenuation for fast signals. Applications include USB 2.0, IEEE1394 and LVDS. The ferrites of the WE-CBA family referred to as “Wide Band” already have high impedances in the lower frequency range and thus have a broadband effect over the entire spectrum. Applications include control signals, RS232, RS422 and DC/DC converters. In the automotive electronics catalog, ferrites designed for higher currents above 1 A are found in the “High Current” category. All WE-CBA ferrites are available from stock – also in small quantities for prototyping. Free samples can be requested. In addition, Würth Elektronik offers design kits for developers with a lifelong replenishment service, so that they always have ferrites with the appropriate values at hand.

Automotive

New Products

Electro Optic & Camera Packaging & Productio

Motion

Computers Communication

Motion

Communication

Motion Automotive

or provide feedback to the user – in the simplest case for optimal alignment of the charging coils. The kit—developed in cooperation with Infineon—has an I²C interface for sensors on the receiver board, and radio modules can be connected on the transmitter board. “Internet of Things” does not mean that every unit has to communicate via the Internet protocol. By transferring data during charging, devices can become part of a cost-effective IoT solution without having to be permanently ‘online’ – we are excited to see what ideas we can bring to our customers with the kit,” says Cem Som. The Wireless Power 200 W Developer Kit represents a 200 W charger, but can also serve as a template for higher power solutions. Würth Elektronik advises developers on selecting suitable components and provides free samples.

Miniature SMT Ferrites with Top Filter Properties Würth Elektronik extends its “WE-CBA SMT EMI Suppression Ferrite Bead” product families. They now include 0402, 0603, 0805, 1206, 1806 and 1812 packages. The SMDs are AEC-Q200 qualified as part of Würth Elektronik’s automotive electronics portfolio. WE-CBA features high-quality Ni-Sn electrodes, a very high current carrying capacity up to 6 A, and operating temperatures from -55 to +125ºC. The ferrites, which are available in various specifications, are ideally suited as data line filters and for decoupling the supply voltage. The miniature SMT ferrites in multilayer technology are soldered directly onto the PCB. They have very good filter characteristics and low RDC. Placed close to the source of interference, maximum impedances around 1000 Ω can be achieved even with the smallest package (0402).

Teledyne Imaging to supply image

sensors for new Copernicus Earth observation missions

Teledyne will supply infrared detectors to the CHIME mission and visible and NIR CMOS and CCD sensors to the CO2M mission Teledyne e2v, a Teledyne Technologies [NYSE: TDY] company and part of the Teledyne Imaging Group has been selected through the grouped proposal of the European Space Agency’s (ESA) industrial policy committee to place six Copernicus Sentinel satellite missions to provide the image sensor technology. The two missions, CHIME and CO2M, funded by ESA, incorporate image sensors at the heart of the instruments and will utilise Teledyne Imaging’s technology.

46 l New-Tech Magazine Europe