Complete 2014 Catalog

8

THE BOXER

THE BOXER

With the Boxer you can easily make gemstone boxes with perfect mitered joints The mitered joints created by using the Boxer eliminate unsightly seams where sides are glued together.Withmitered joints the seams become inconspicuous. Using the Boxer to hold a slab at an angle, ends can be quickly ground to an accurate 45° bevel using a diamond lap. Four such slabs will fit together to make the sides of a box up to 3" deep with no limit on length. The Boxer can be used with a 6" “No-Hole” lap on the right side of a Genie or a standard 6" lap on the left side. The Pixie will require a 4" “No-Hole” lap, and a smaller plastic pan, whichyoumaypurchase fromthe supermarket. For use on the Titan you will need to purchase the “Boxer to TitanAdaptor” listed separately below, this will allow mounting on either the right or left side of the Titan with a maximum 6" lap size. We recommend a 100 grit lap. Sanding and polishing may be done with Nova Discs or Magnetic laps. The Boxer is made of a combination of stainless steel and aluminum parts. These adaptors fit over the shafts of the Genie, Pixie, Big- Foot and Xpert. The adaptors all have a 1" OD to fit our Galaxy and Nova wheels. Order extra right hand adaptors for specialty wheels for easy change out of wheels while working. Both R/H adaptors have hole for accepting a 1 ⁄ 4 "x 20 bolt in pads. The L/H Genie adaptor comes with lap connector nut. 101-ADP-GR ............R/H Genie........... 8 oz............71.50 101-ADP-GL ............L/H Genie........... 8 oz............82.50 101-ADP-PR. ............R/H Pixie............ 6 oz............38.50 501-ADP-BFR ..........R/H BigFoot....... 6 oz............49.50 501-ADP-XR ............R/H Xpert........... 8 oz............40.50 SHAFT ADAPTORS FOR GEM-MAKERS SPACERS FOR GEM MAKERS 101-PSP-1............. Pixie Spacer.............. 1 oz.. .......... 5.00 101-GSP- 3 ⁄ 4 ........... Genie Spacer............ 1 oz. ........... 5.50 101-GSP-1- 3 / 8 ....... Genie Spacer............ 1 oz. ........... 6.50 101-TSP-1- 3 ⁄ 4 ........ Titan Spacer.. ........... 5 oz. ......... 12.00 CUSTOM SPACERS (Fit Genie, Titan, Xpert) 101-GSP-1............ 1" wide spacer.......... 1 oz.. .......... 6.50 101-GSP- 5 ⁄ 8 ........... 5 ⁄ 8 " wide spacer......... 1 oz. ........... 6.50 101-GSP- 1 ⁄ 2 ........... 1 ⁄ 2 " wide spacer......... 1 oz.. .......... 6.50 101-GSP- 1 ⁄ 4 ........... 1 ⁄ 4 " wide spacer......... 1 oz.. .......... 6.50 100-BOXER.............. Shp wt. 5 lbs.. ......................... 159.00 100-BOXER-TA.... Shp wt. 2 1 ⁄ 2 lbs.. ........................... 75.65 The Boxer mitered joint attachment The Boxer to Titan Adaptor

** IMPORTANT ** WEAR SAFETY GOGGLES WHEN USING THE BOXER

GENIE WHEEL ADAPTOR KIT

Now you can enjoy the convenience of an extra adaptor for adding wheels to your Genie without having to figure out in advancewhich spacers youmight need. This kit contains the extra Genie right hand adaptor and nut, plus seven extra spacers to accommodate anywheel combination. Contains the following spacers: two 1 3 / 8 " wide, three 3 / 4 " wide, one 5 / 8 " , wide, and one 1 / 4 " wide. 101-ADP-GRK......................... 2 lbs. ...................... 99.75