Complete 2014 Catalog

BUFF KITS

9

JEWELER'S BUFF KITS FOR GEM-MAKERS You can buff and polish jewelry on your Titan and Pixie as well as on the Genie.

Each kit contains 1 muslin buff, 1 flannel buff, 1 bar of Tripoli, one bar of Red Jeweler's Rouge, and the spacers needed for mounting. The Genie and Pixie kits also contain a right hand adaptor for mounting on a shaft. Wheels are mounted directly onto the Titan shaft. The Genie Kit has 6" buffs, Titan 8" buffs, and the Pixie Kit has 4" buffs.

We've put together all the necessary adaptors, spacers, buffs and rouge you need to convert your Gem-Maker to a buffing machine without a lot of expense.

Contains: 1- 8" muslin buff, 1- 8" flannel buff, 1 bar of Tripoli, 1bar red jeweler’s rouge, 4 spacers. Buffs and spacers fit directly on Titan shaft. TITAN BUFF KIT 100-JBK-T............ 4 lbs........... 46.00

Contains: 1- 6" muslin buff, 1- 6" flannel buff, 1 bar of Tripoli, 1 bar red jeweler’s rouge, 1 R/H adaptor w/nut, 6 spacers. GENIE BUFF KIT

Contains: 1- 4" muslin buff, 1- 4" flannel buff, 1 bar of Tripoli, 1 bar red jeweler’s rouge, 1 R/H adaptor w/nut, one spacer. PIXIE BUFF KIT

100-JBK-P............ 3 lbs............53.00

100-JBK-G........... 6 lbs......... 109.00

*** For replacement buffs and rouge see page 82-83 ***

NEW ADAPTOR FOR USING TAPERED SPINDLE ON GEM-MAKERS This adaptor allows you to use a 3 / 8 " R/H tapered spindle for attaching buffs to the right hand of the Genie, Pixie, BigFoot andTitan.You can then use buffs with standard pin hole cen- ters onyourGem-Maker. (Seepage83 for buffs.)The adaptor spins into the 1 ⁄ 4 -20 adaptor hole on the right hand side of the machine toallowyou toattach thespindle. Fits taperedspindle shown below. 101-ADP-3/8...................... 8 oz. .............................. 9.95 TAPERED SPINDLE FOR GEM- MAKERS Use with adaptor above to attach buffs with standard pin hole centers to your Gem-Maker. 154-TSR4............ Shp. Wt. 6 oz. ............................. 15.00 This versatile guide has variable rock placement and adjust- able rollers which allows small slabs to be cut with a small trim saw. Marked in 1 ⁄ 4 " increments. This guide works on our Genie Trim SawAttachment, Wizard Trim Saw, and the New Xpert Trim Saw Attachment . We recommend Super T brand cyanoacrylate adhesive and Super Solvent for use with this product. (Adhesive and solvent not included - See catalog page 93 to purchase) DOP STYLE SLABBING GUIDE

ADAPTOR TAPERED SPINDLE

Shown on Genie: adaptor, tapered spindle and buff.

605-2013 Dop Style Slabbing Guide. . Shp.Wt. 2 lbs. . ... 125.00