Complete 2014 Catalog

27

FOREDOMACCESSORIES

FOREDOM ®

INTERCHANGEABLE HANDPIECES

General purpose handpieces # 30, 44T, 28 and 20 have Foredom’s Quick Disconnect feature that makes it fast and easy to interchange handpieces or to attach and remove them. Handpieces # 20 features Foredom’s Quick Change Bur Release that allows you to insert and remove burs without the use of a chuck key or pin and wrench. All hand- pieces have pre-lubricated ball bearings that require no additional lubrication and are suitable for continuous use. NOTE: Burs shown are not included.

# 30 Foredom's most popular handpiece features a geared 3-jaw #0 chuck that takes any size shank accessory shank or drill bit up to 5 ⁄ 32 " (4mm). Comes with 103-CKH-1 chuck key with molded plas- tic handle. Various bench top tools are available to work with the versatile # 30, including Foredom’s drill press and handpiece holder (page 30). 5 3 ⁄ 16 " long, 1" dia, weight, 5.85 oz. 103-HP30....................Shp Wt 10 oz...................................... 68.00 # 44T Collet-type chuck handpiece accommodates accessories with shank sizes up to 1 ⁄ 4 " in diameter. Comes with three collets , 3 ⁄ 32 " (2.35mm), 1 ⁄ 8 "(3.18mm) and 1 ⁄ 4 " (6.4mm), and pin and chuck wrench. Other fractional andmetric collets are available in Collet Set 440 (page 30). Can also be used in Foredom’s handpiece holder and drill presses. (page 30). 5 5 ⁄ 8 " long, 1" dia. (center) 3 ⁄ 4 "dia, (taper), weight 5.85 oz. 103-HP44....................Shp wt 9 oz......................................... 60.00 # 28 Collet-type chuck handpiece with a slender, comfortable design and tapered grip. Comes with 3 ⁄ 32 " (2.35mm) and 1 ⁄ 8 "(3.18mm) col- lets, and pin and chuck wrench. Other fractional and metric collets are available in collet set 600 (page 30). 5 1 ⁄ 4 " long, 3 ⁄ 4 " dia. (center) 1 ⁄ 2 "dia. (taper), weight 3 oz. 103-HP28....................Shp wt 5 oz......................................... 60.00 # 20 Has molded plastic front grip with tapered sides for easy and close handling. Comes with Lever Action for quick and easy insertion and change of accessories. Accommodates 3 ⁄ 32 " Shank only. To insert an accessory, rotate lever 90° away from handpiece body, insert accessory, and move lever forward or back 90° into locked position. 5 5 ⁄ 8 " long, 1 1 ⁄ 8 " dia. (center) 3 ⁄ 8 " dia. (front taper), weight 4 oz. 103-HP20..................Shp wt 5 oz.................................. 89.00

# 30

# 44T

# 28

# 20

SPEED CONTROLS FOR 1 ⁄ 6

HP SERIES SR MOTORS

FCT-1

BASE AND YOKE ASSEMBLY

The reliable FCT is Foredom's most popular foot operated speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom for ease of use. It provides smooth control throughout the entire speed range. CSA listed. 7" long, 4 1 ⁄ 2 " wide, 2 5 ⁄ 8 " high. 103-FCT-1 (115V)............Shp Wt 2 lbs......................................... 35.00 103-FCT-2CE (230V).......Shp Wt 2 lbs......................................... 70.00 The SCT offers the same electronics and smooth control as the FCT but in a much heavier, cast iron housing. The bottom surface of the SCT is covered with non-skid material. The added weight of the metal housing eliminates any unexpected movement of the control along the floor. CSA listed. 6 3 ⁄ 4 " long, 4 " wide, 2 5 ⁄ 8 " high. Not available for use with SR CE machines. 103-SCT-1 (115V)..............Shp Wt 6 lbs....................................... 69.00 SCT-1

Turn your hang-up style mo- tor into a bench top model with the cast iron base and yoke assembly. It includes all mount- ing screws. Fits series R, S, and SR motors. 103-UA10451...... 7 lbs......... 49.00