Complete 2014 Catalog

58

SAWACCESSORIES AND COOLANT

BLADE COOLANTS

RO C - O I L—T H E ORIGINAL USER- FRIENDLY, HIGH PERFORMANCE MINERAL OIL SAW COOLANT

Before buying any saw blade, make certain you know which type of coolant your rock saw requires. All diamond saw blades cut faster in an oil lubricant, but the old standard cutting oils have many undesirable features. Some saw blades and rock saws still must be used with oil, especially the larger blades and saws. Water is now often used as a coolant, but it can rust some blades and rock saws. Using the correct coolant will directly affect blade performance. The following is a general guideline: SOFT ROCK: Use water, water soluble oil, or oil. MEDIUM HARD ROCK: Use a water soluble oil or oil. HARD, DENSEROCKSUCHASAGATE: Use an oil coolant only.

✱✱ IT'S NON TOXIC: Roc-Oil is rated as a food grade mineral oil so you know it's safe to handle. It doesn't burn your skin, unless you are very sensitive, and has no disagreeable odor. ✱✱ IT' HAS A HIGH FLASH POINT: Roc-Oil is non- flammable under normal conditions. Its flash point is 309° which is above normal temperatures. It's also above the flash point of similar, lower grade mineral coolants. Dispose of Roc-Oil following your local requirements for mineral oils. 412-RO-1...................1 gal...... Shp. Wt. 10 lbs................... 30.00 412-RO-4............4 gal case..... Shp. Wt. 40 lbs................. 115.00 Use "Roc-Cut" in your trim saws, cabbers, faceting units, and sanders—whatever uses a splash or recirculating system. It's inexpensive (mix 1 part with 20 parts water for sawing and 1 part with 30 parts water for grinding) and it will prevent rusting as well as give you a great cutting lubricant. Nontoxic, non-allergenic, has no vapors, odor or greasy film. Can be filtered and re-used indefinitely. NOT for slab saws when cutting quartz materials, nor for leaving in tank. 711-70-1116. ...........16 oz.........Shp wt 2 lbs...................... 8.95 711-70-1117. ...........1 gal..........Shp wt 10 lbs.................. 50.15 “ROC-CUT” WATER SOLUBLE LUBRICANT Our Roc-Oil is a high quality, food grade mineral oil that out performs other cutting oils and without any of their usual disad- vantages. Use it to cut any rock, from soft to hard, and in any saw, large or small. You get top quality performance along with user friendly advantages.

ROCK GRABBER CLAMPS

These handy clamps fit easily into most saw vises, making it possible to cut a stone to the last thin slab section. Made of durable cast aluminum. Comes in two sizes: 3" and 5". 601-70-1003............3"...............1 lb............................22.00 601-70-1015............5"...............1 lb............................23.75

BLADE DRESSING STICKS

WATER AID

WaterAid is a concentratedwetting agent. It increases cutting action of sawing, grinding, and sanding/ polishing operations using water by eliminating surface tension and preventinghydroplaning. It'sbiode- gradeable andnormallyharmless to skin. Approx. 6 drops per pint is all that's needed.

These dressing sticks make it easy to sharpen saw blades to keep them cutting properly. Made of special aluminum oxide and designed for dressing diamond blades. Shp. Wt. : 8 oz. For Blades: Stick Size Order # Price

4" – 8"

1 ⁄ 2

" x 1 ⁄ 2

" x 6"

109-SS-05 109-SS-10 109-SS-20

4.60

410-WA-108....... 8 oz. bottle...............11 oz.......................3.25 410-WA-116....... 16 oz. bottle........... 1 1 ⁄ 2 lbs.......................5.25 410-WA-110....... 1 gal.......................... 9 lbs.....................27.75

10" – 14"

1" x 1" x 6" 2" x 2" x 6"

10.50 23.90

16" +