Complete 2014 Catalog

61

VIBRATORY TUMBLERS THE MT-4 MINI-SONIC VIBRATORY TUMBLER

It’s unique tumbling operation is the key to the high performance of the MT-4. The vibratory motion is achieved without any moving parts. It improves the polishing process and uses only a small amount of abrasives compared to ordinary tumblers. Load capacity is approximately four pounds including stone, fillers and abrasives.You con- trol the rotation and intensity of the tumbler operation with solid state electronic controls. Hoppers give exceptionally long wear. They are made of cast plastisol.With no motor, belts or pulleys to worry about, you have a tumbler built for years of worry free service. The MT-4 Mini-Sonic Tum- bler is the best all-around tumbler on the market when it comes to performance, easy operation, and long-lasting service.You can tumble polish almost any kind of stone, from opal to topaz, delicate carvings and preforms, as well as metal items such as coins, jewelry findings, shell casings, etc.

HOW THE MT-4 WORKS

The MT-4 Mini-Sonic Tumbler operates without shafts, belts, pulleys, eccentric weight or even a motor—no moving parts, so the MT-4 will far outlast other types of tumblers. It operates on a unique principle employing interrupted electrical cur- rent that provides vibration as the driving force powering the rotation of the load. Operating frequency is 3600 vibrations per minute on 60Hz models and 3000 vibrations per minute in 50Hz Export models. Rotation and intensity is adjustable with solid state electronic controls. During rotation, the tumbling load is alternately sepa- rated and compacted during each vibratory cycle. This improves the tumbling process and allows fresh abrasive to be drawn in between materials in the tumbler hopper. Only the contents inside the hopper actually rotate while the hopper itself remains practically motionless except for the driving arc of motion. Only a small amount of abrasives are required in the Mini-Sonic tumbling process compared to ordinary rotary tum- blers. As the abrasive begins to pulverize or break down and

NOTE: when polishing with Vibra-Dry compounds, no water is required, and you will not have the slurry described above. combines with rock dust and water, a slurry or coating mixture is formed, and it is this coat- ing which should be maintained throughout all the tumbling processes. Too much water or too much abrasives will cause materials to collect in the bottom of the hopper and not rotate properly. It is only necessary to main- tain a thin coating of abrasive slurry between the materials in the load to keep the polishing process working properly.

Model

Voltage

Order #

Shp. Wt.

Price

MT-4

115V 432-004

283 .00 11 lbs.

MT-4 *Export

220V 432-004-X 304.00 11 lbs.

MT-4 *Export

240V 432-004-XA 312.00 11 lbs.

Fits All Models

Hopper -4 w/ lid

433-04H

59.00 2 lbs.

Hopper lid

Fits All Hoppers 433-04L

18.50 8 ozs.

Tune up Kit

MT-4

490-402097

49.25 7 ozs.

* Export models come 220 or 240 Volt. Specify voltage or country of ultimate destination when ordering.