Complete 2014 Catalog

70 TUMBLING ABRASIVES

SILICON CARBIDEABRASIVES

SILICON CARBIDE ABRASIVES

GRIT SIZE

NET WT.

SHIP WT.

PRICE

ORDER #

UNGRADED 60/90 COARSE GRIND

1 1 ⁄ 4 lbs.

400-0090-01 1 lb. 400-0090-02 2 1 ⁄ 2 lbs. 400-0090-05 5 lbs.

5.55

3 lbs.

11.15 18.90 35.05

5 1 ⁄ 2 lbs.

400-0090-10 10 lbs. 11 1 ⁄ 2 lbs.

400-0090-50 50 lbs.

53 lbs. 134.75

1 1 ⁄ 4 lb. 3 lbs.

400-0220-01 1 lb. 400-0220-02 2 1 ⁄ 2 lbs. 400-0220-05 5 lbs. 400-0220-50 50 lbs. 400-0400-01 1 lb. 400-0400-02 2 lbs. 400-0400-05 5 lbs. 400-0600-01 1 lb. 400-0600-02 2 lbs 400-0600-04 4 lbs. 400-0600-08 8 lbs. 400-0600-40 40 lbs. 400-1000-01 1 lb. 400-1000-02 2 lbs. 400-1000-04 4 lbs. 400-1000-08 8 lbs. 400-1000-40 40 lbs. 400-0400-50 50 lbs.

6.35

GRADED 220 COARSE GRIND

13.10 21.30 37.40

5 1 ⁄ 2 lbs.

400-0220-10 10 lbs. 11 1 ⁄ 2 lbs.

53 lbs. 143.75

1 1 ⁄ 4 lb. 3 lbs.

7.20

GRADED 400 FINE GRIND

12.70 25.15 45.85

These abrasives have sharp, hard grains for fast cut- ting. Use in tumblers, flat laps, sphere machines or wherever coarse and fine grinding grits are needed. The grit sequences below are standard, but can be varied depending on material and need. Standard sequence for rotary tumblers is 60/90, 220 and 600 silicon carbide, followed by a polish. For best results, use an aluminum oxide pre-polish 800 grit before the final polish. Use this same silicon carbide sequence including the aluminum oxide pre-polish, in vibratory tumblers. When lapping, add the 400 and 1000 grits to the standard sequence. NOTE: Silicon carbide abrasives are packaged in sturdy containers for convenient storage and use. Prevents leakage and contamination. The MT-1 kit is designed for vibratory tum- blers such as the MT-4 Mini-Sonic tumbler. The kit contains the following: 60/90, 220 and 600 silicon carbide grits, aluminum-oxide pre- polish, polish, and ceramic media for filler. You will have enough grit for several loads. BEGINNING WET KIT FOR MT-4 MINI- SONIC TUMBLERS When using larger tumblers, it is more economical to purchase grits in larger quantities, and in the grit sizes to fit your needs. tumblers. The KW-20 kit contains enough abrasives to do about 3–4 loads in tumblers with 8 to 10 pound barrels.

5 1 ⁄ 2 lbs.

400-0400-10 10 lbs. 11 1 ⁄ 2 lbs.

53 lbs. 176.25

1 1 ⁄ 4 lb. 3 lbs. 5 lbs. 9 lbs. 1 1 ⁄ 4 lb. 3 lbs . 5 lbs . 9 lbs .

7.60

GRADED 600 PRE-POLISH

13.50 22.10 38.95

43 lbs. 149.80

10.05 15.05 28.05 52.10

GRADED 1000 PRE-POLISH

43 lbs . 200.00

GRIT KITS FOR STONES Kits are designed primarily for those just learning the fun of tumbling stones. The abrasives included will polish a variety of stones from soft to hard. The KW-10 kit contains enough abrasives for ap- proximately 8–10 loads for the MT-4 tumbler. You will have less for the Raytech TV-5 and similar WET KITS FOR ROTARY OR VIBRATORY TUMBLERS The KW-10 and KW-20 wet kits can be used in rotary and vibratory tumblers, and use water in each step. Kits contain the following: 60/90, 220 and 600 silicon carbide grits, aluminum-oxide pre- polish, polish, ceramic media for filler, measuring cups, instructions. 403-KW-10................. Shp.wt. 7 lbs.............. 37.80 403-KW-20................. Shp.wt. 13 lbs............ 65.00

403-MT-1.................... Shp.wt. 3 lbs.............. 17.00