Complete 2014 Catalog

JEWELER'S BENCH TOOLS

87

PIN VISES

SINGLE-END SLIDE PIN VISE Pin vise has knurled slide for easy one-hand operation. Capacity of 0 to 0.8mm. Length is 4 1 ⁄ 2 ". 150-PIN-221................................... 6 oz..................................4.80 DOUBLE END PIN VISE A different size steel collet mounted at each end of hollow handle makes this a highly versatile tool. Use to hold drills, taps, reamers, wire, rods, or precision knife blades. Collet capacity: 0 to .10" (0 to 2.5mm). Nickel-plated. Length approx. 4 1 / 2 ". May vary slightly from photo. 160-PV-657..................................... 6 oz..................................4.15 SWIVEL HEAD PIN VISE All metal, hexagonal swivel head pin vise comes with two double end collets for 0 to 3.3mm" capacity. Overall length of pin vise is 3 1 / 2 ". 150-PIN-220................................... 10 oz................................4.65

SINGLE END PIN VISE

DOUBLE END PIN VISE

SWIVEL HEAD PIN VISE

BENCH BLOCK Used to support work while flattening or when laying out designs. Case hardened steel milled smooth. Measures 2 1 ⁄ 2 " x 2 1 ⁄ 2 " x 1". 160-AN-125..................................1 lb....................................14.45 BENCH PIN Wooden, fits into metal holder above or slot in workbench as a sup- port for filing, sawing, setting, etc. Pin is 5 1 ⁄ 2 "L x 2 1 ⁄ 4 " W. 160-BP-161. ................................. 8 oz...................................2.95 BENCH VISE This handy vise can be either clamped or screwed onto the work- bench. Has twin guide rods to assure parallel closing and rigidity. Jaws are 1 1 ⁄ 2 " wide, and smooth to prevent marring of soft metals. 150-VIS-204................................. 2 lb....................................9.45 V-BLOCK AND CLAMP This handy bench extension gives the extra support and space needed for filing, sawing, and drilling. Especially useful when us- ing jeweler’s saw. Block size: 2 1 ⁄ 4 " x 7 1 ⁄ 2 ". Clamp fits table up to 1 3 ⁄ 4 " thick. 150-BPN-105................................ 1 lb....................................7.95 BENCH PIN-ANVIL COMBINATION For supporting pieces being flattened, filing and laying out work. Anvil top is smoothly finished. Wood pin measures 4" long by 1 3 ⁄ 4 " wide and is replaceable. 160-AN-118.................................................3 lbs 8 oz..........14.95 160-BP-170 Pin only ...... 7"L x 1 3 ⁄ 4 "W.......5 oz.....................3.95 BENCH PIN IN METAL HOLDER Holder screws onto edge of work bench, extending working space. Thumb screw holds wood bench pin which is included. Pin is 5 1 ⁄ 2 "L x 2 1 ⁄ 4 " W. 160-BP-166. ................................. 1 lb. 1 oz...........................9.95

BENCH VISE

V-BLOCK

BENCH PIN ANVIL

BENCH PIN WITH HOLDER

BENCH PIN

BENCH BLOCK