A16 - Dyno Fabric Edge Sealer 10.5 oz 12PK

Hazard(s) not otherwise classified (HNOC) Supplemental information

None known.

None.

3. Composition/information on ingredients Mixtures Chemical name

Common name and synonyms

CAS number

%

64742-89-8

Solvent naphtha (petroleum), light aliph.

20 - 40

79-01-6

Trichloroethylene

20 - 40

67-64-1

Acetone

10 - 20

106-97-8

Butane

10 - 20

74-98-6

Propane

10 - 20

1330-20-7

Xylene

1 - 2.5

106-88-7

1,2-Butylene Oxide

0.1 - 1

97-86-9

lsobutyl Methacrylate

0.1 - 1

142-82-5

n-Heptane

0.1 - 1

111-65-9

Octane

0.1 - 1

108-88-3

Toluene

0.1 - 1

Other components below reportable levels 10 - 20 *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Wash off with soap and water. Get medical attention if irritation develops and persists. Rinse with water. Get medical attention if irritation develops and persists. Rinse mouth. Get medical attention if symptoms occur. May cause drowsiness and dizziness. Headache. Nausea, vomiting. Aspiration may cause pulmonary edema and pneumonitis. Severe eye irritation . Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation. May cause redness and pain. Provide general supportive measures and treat symptomatically. Keep victim under observation. Symptoms may be delayed. IF exposed or concerned : Get medical advice/attention. If you feel unwell, seek medical advice (show the label where possible). Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. Show this safety data sheet to the doctor in attendance.

Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed General information 5. Fire-fighting measures Suitable extinguishing media Unsuitable extinguishing media Specific hazards arising from the chemical Special protective equipment and precautions for firefighters Fire-fighting equipment/instructions

Powder. Alcohol resistant foam. Carbon dioxide (CO2). Do not use water jet as an extinguisher, as this will spread the fire.

From the library of: Superior Sewing Machine & Supply LLC

Contents under pressure. Pressurized container may explode when exposed to heat or flame.

Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Move containers from fire area if you can do so without risk. Containers should be cooled with water to prevent vapor pressure build up. For massive fire in cargo area, use unmanned hose holder or monitor nozzles, if possible. If not, withdraw and let fire burn out. Use standard firefighting procedures and consider the hazards of other involved materials. Move containers from fire area if you can do so without risk. In the event of fire and/or explosion do not breathe fumes. Extremely flammable aerosol.

Specific methods

General fire hazards

Product name: 10.5 OZ DYNO FABRIC EDGE SEALER LB 12PK

SDS US 2 / 13

Product#: 1000012056 Version#: 04 Revision date: 08-12-2015 Issue date: 08-01-2014

Made with FlippingBook - professional solution for displaying marketing and sales documents online