TPT November 2010

C utting , S awing & P rofiling Safe and fast high- performance band saw

while an optional 3° inclined saw frame offers special benefits for cutting profile materials. Behringer has also equipped the HBV500A with high-precision cutting force control. This feature offers constant cutting feed rate for solids and constant cutting force for pipes or sectional materials. The optimum service life and the precise cut- offs at high output are setting standards for band saws.

An intelligent stroke control of the saw frame ensures minimum downtime by lifting the saw frame only to a small clearance for material feed and by moving the frame with a rapid lowering speed before cutting. Behringer GmbH – Germany Fax: +49 7266 207 500

Email: info@behringer.net Website: www.behringer.net

THE new HBV500A from Behringer, Germany, is a fully covered machine featuring improved discharge of swarf and easy access for cleaning. The cutting range for round bars is Ø 510mm and for flat materials up to 500x500mm. The cutting speed can be adjusted infinitely from 20 to 140m/min, according to the material. The HBV500A quickly and securely cuts steels, high tensile solids and other materials. The machine is designed to provide the best cutting results. A rigid, low-torsion and low-vibration cast iron saw frame and two large, ground and hard-chrome plated guide columns deliver the base for performance. The quadruple guides, pre-tensioned and backlash-free, simplify difficult cutting tasks

The new HBV500A from Behringer

86

N ovember 2010

www.read-tpt.com

›