eCatalogue General 80515

First page Previous page 20-21 Next page Last page

Fuel Equipment .com Custom fuelling solutions

CimTek Tank Dryer

Hose Reels

SKU 113301 Piusi Automatic hose reels for diesel and oil have been de- signed to ensure high efficiency. The sturdy structure can guarantee best performance also in heavy duty conditions. Features: - Reduced pressure loss - Corrosion resistant: structure made of stainless steel - Easy and versatile installation through the rotating support plate and the adjustable arm positions - Hose stop - Safety: lateral protective covers SKU 113303 Piusi Automatic hose reels for diesel and oil have been designed to ensure high efficiency. The sturdy structure can guarantee best performance also in heavy duty conditions. Features: - Reduced pressure loss - Corrosion resistant: structure made of stainless steel - Easy and versatile installation through the rotating support plate and the adjustable arm positions - Hose stop - Safety: lateral protective covers SKU 110101 Macnaught MDTP2520- 01 Diesel reel - spring-rewind Heavy-duty reel ideal in truck mount & mine applications Fitted with 20m x 25mm i.d. hose Operating pressure up to 3,500 Kpa (500 psi) Maximum operating temperature 60°C 1” BSP(F) reel inlet and 1” BSP(M) hose outlet Wall / floor mounting bracket integral to the reel design 20m x 25mm hose fitted

$499.00 + GST

$15.00 + GST

SKU 1530117 Cim-Tek Tank Dryer Absorbs water from the bottom of your fuel tank, contains super-absorbent polymer. Tank opening diameter 2” or over Instructions: 1. Extinguish cigarettes or any other flammable material before opening fuel tank. 2. Be sure diameter of the tank opening will allow the Tank Dyer to be put into and removed from tank easily. 3. Hold the cord and lower the Tank Dryer into the tank. 4. Be sure the cord will allow the Tank Dryer to lie flat on bottom of tank. (This is where the water will be.) Shorten cord to remove excess slack. 5. Attach the retrieval cord to allow fuel cap to be replaced, but be available to remove the Tank Dryer when it is full. (Note: The best place to attach the cord is on the underside of the fuel cap.) 6. When the Tank Dryer starts to absorb water, it will expand. Until this condi- tion occurs it may remain in the fuel tank, but should be checked in an hour. **The Tank Dryer should be checked weekly and removed when swollen. 7. Install the Tank Dryer so you don’t obstruct the fuel outlet or sending unit. Important Note: alcohol-based fuel additives designed to disperse water will

Bare No hose

Click to Buy

$839.00 + GST

Click to Buy

reduce the effectiveness of the Tank Dryer. NOT FOR USE WITH ETHANOL BLENDS .

Click to Buy

10m x 25mm hose fitted

$50.00 + GST

$1199.00 + GST

Base

Assembly

Cap

Click to Buy

SKU 223055 CIM-TEK Pre-Vent Tank Cap The Pre-Vent pressure cap is a Cim-Tek® orginal patent design for use on small above ground farm tanks, commercial gasoline tanks, distil- late tanks, fuel transfer tanks, small oil storage tanks, and industrial oil transfer tanks. The Pre-Vent helps to maintain fuel quality by reducing condensation and evaporation loss. It’s designed to divert rain and con- densation away from the fill hole. A lockable design option is available with the Pre-Vent II pressure cap. 60002 Cast-Iron Base with Plated Cap Featuring Security Anti-Theft Arm.

Click to Buy

Macnaught MDTP2520 Diesel Reel

FUELLING Systems & Equipment Australian

Australian Fuelling Systems & Equipment PO Box 7162 NEMSC 2348 7-11 Armstrong Street Tamworth 2340 Ph: +61 2 6760 7816 Fax: +61 2 6760 7826 www .fuel equipment.com

Made with FlippingBook