GE Aftermarket Catalog

Molded Case Circuit Breakers Power Management System Accessories Spectra ® RMS Circuit Breakers with MicroVersaTrip ® Plus and MicroVersaTrip ® PM Trip Units All Devices UL Listed for Factory or Field Installation (UL File No. E-57253)

Required Accessories

Type

Accessories

Standard

–

Ground Fault Option with 3-phase, 4-wire

Neutral Current Sensor and Terminal Block or Neutral Current Sensor and Junction Box

MicroVersaTrip ® Plus Trip Unit

or 1-phase, 3-wire service

Power Supply Plate or Voltage Module 1 or Power Supply Assembly 2 Power Supply Plate and Voltage Conditioner Plate or Voltage Module 1 or Power Supply Assembly 2 and Voltage Conditioner Assembly 2

Control Power Option

Standard or with Protective Relaying

MicroVersaTrip ® PM Trip Unit

Junction Box, Cable Harness and Auxiliary Switch

Components: Parts 1

Ground Fault Option with 3-phase, 4-wire

Neutral Current Sensor

or 1-phase, 3-wire service

1 For installation into GE Spectra ® Series Switchboards only. 2 Requires fuse protection and other components; refer to accessory detail for additional information.

Distribution Cable Harness 3 The Distribution Cable Harness is a modular connector used to carry electronic signals and/or control power between Spectra ® RMS Molded Case Circuit Breakers with MicroVersaTrip ® Plus or MicroVersaTrip ® PM Trip Units and Distribution Cable accessories. The harnesses come in three lengths. List Price Description Harness Length Product Number GO-135PM Distribution Cable Harness 11 inches SDCHA11 $70.00 Distribution Cable Harness 30 inches SDCHA30 $80.00 Distribution Cable Harness 60 inches SDCHA60 $100.00 3 Cannot be connected together. Use 30 inch Distribution Cable Extension (SDCEA30) to extend. Distribution Cable Extension The Distribution Cable Extension is used to provide modular expansion of the Distribution Cable System. List Price Description Harness Length Product Number GO-135PM Distribution Cable Extension 30 inches SDCEA30 $80.00 Distribution Cable Terminal Block The Distribution Cable Terminal Block is a modular attachment primarily used to provide an alternate means of input to Spectra ® RMS Molded Case Circuit Breakers with MicroVersaTrip ® Plus or MicroVersaTrip ® PM Trip Units. The Terminal Block plugs into the breaker distribution cable receptacle allowing the direct connection of breaker signals via screw terminals. This allows point-to-point wiring of breakers instead of using the Distribution Cable System. List Price Description Product Number GO-135PM Distribution Cable Terminal Block SDCTBA11 $110.00 Power Supply Assembly The Power Supply Assembly is used to provide +24 Vdc Control Power to Spectra ® RMS Molded Case Circuit Breakers with MicroVersaTrip ® Plus or MicroVersaTrip ® PM trip systems via the Distribution Cable System. The assembly requires a minimum input voltage of 85 Vac to operate properly (the maximum voltage rating is 240 Vac). Supplemental +24 Vdc input terminals are provided for backup control power applications. The input must be fused with 1/2 ampere class CC fuses (not included). Not suitable for 400 Hz. List Price Description Voltage Rating Product Number GO-135PM The Power Supply Assembly is rated 24 watts 85 - 240 Vac SPSAA $1000.00

Distribution Cable Harness

Distribution Cable Extension

Distribution Cable Terminal Block

(+24 Vdc @ 1.0 ampere) and has the maximum capacity to power a Distribution Cable System consisting of 20 breakers and has a maximum system cable length of 40 feet.

Power Supply Assembly

Aftermarket Catalog

www.geelectrical.com

1-13

Prices and data subject to change without notice