Spring/Summer 2018 - Wagaero

Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 31

ENGINE PARTS

ALTERNATORS, CONTACTORS, SOLENOIDS

I-900-001 I-900-002

I-900-003

n Alternators by B&C Specialty Products Inc. Prepayment required. Shipped FOB Factory. Shipping charges will be billed after shipment. BC460-H, 60 Amp Homebuilt Alternator The belt-driven BC460-H features heavy-duty sealed ball bearings, two internal cooking fans and a precision dynamically balanced rotor (rare in the industry, but standard on evert B&C). Unit includes your choice of Boss (wide deck) or Case (narrow deck) mounting brackets, field connector assembly, belt tension arm, high performance belt and mounting hardware. The BC460-H may be used in either a 14 volt or 28 volt electrical system, combine with Our Controllers I-900-100 or I-900-101 (depending on your application and electrical system configuration). Weighs 7.1 lbs. Code 8 Description Cat. No. Price BC460-H Alternator with Boss Mount Kit I-900-001 $530.00 BC460-H Alternator with Case Mount Kit I-900-002 $530.00

I-256-012

I-215-000

n Solenoids Description

P/N Price Sky-Tec Aircraft Starter Solenoid FAA/PMA’d Intermittent duty, Activation +12V to S-Terminal (frame is grounded by mounting) Features: Silver contacts provide 300A in-rush capability, strong spring and high-current coil for quick contact opening - minimizing arcing, single coil terminal (other end connected to case). Code 4 STS-S12 I-256-012 $79.95 Starter Relay Solenoid Cat. No.

12V intermittent duty with adequate current capacity for most engines. Code 8

$13.65

I-215-000

L-40, 40 Amp Homebuilt Alternator An ideal source of power for aircraft requiring ample electrical output and modest weight. Belt driven unit is designed for use on Lycoming engines with an external voltage regulator. Unit includes your choice of Boss (wide deck) or Case (narrow deck) mounting brackets, field connector assembly, belt tension arm, high performance belt and mounting hardware. Weighs 6.1 lbs. Code 8 L-40 Alternator with Boss Mount Kit I-898-100 $379.00 L-40 Alternator with Case Mount Kit I-898-200 $379.00

CONTROLLERS / REGULATORS

I-898-100

BC410-H4, 20-40 Amp Homebuilt Alternator Every spline or pad-driven BC-410-H is externally controlled and features heavy-duty sealed ball bearings, two internal cooking fans, precision- balanced rotor, and a “shear section” drive coupling. The BC410-H is available for both 14 volt and 28 volt applications, and is externally-regulated. It should be appropriately matched with our I-900-100, I-900-101 or I-900-102 Controllers (depending on your application and electrical system configuration). It measures 4.6” in diameter and 6” in length. Weighs 5.75 lbs. Code 8 BC410-H4 Alternator I-900-003 $499.00

I-900-100

I-900-102

n Controllers by B&C Specialty Products Inc. Lightweight, space-saving, and cost-effective this controller is an alternative for any aircraft electrical system, while also improving safety of flight. Operating as a “quiet,” linear regulator, it generates no audio or radio noise (in contrast to switching-type regulators). It provides a vital safeguard for your aircraft electrical system with a solid-state, “crowbar” overvoltage protection circuit and functions as an important low-voltage monitoring and warning system. Code 8 14V Controller 14V Controller for use w/Stand-by Alternators n Voltage Regulator by Hartzell Plane Power Solid-state with over-voltage protection, field short (over current) protection, and reverse battery protection, this regulator supports precision load sharing for twin applications and an alternator inoperative lamp. Designed to be set up in the field for 14 or 28 volt operation by configuring the two jumpers within the voltage regulator. Code 4 28V Controller

n Alternator Filter FAA/PMA’d Minimizes or eliminates alternator noise or whine in intercom systems, audio panels, nav/coms and other avionic systems. Operating Voltage: 50 VDC. One year manufacturer’s warranty. Code 4

$68.00

I-226-000

I-226-000

n Alternator Belts 76026 Lycoming Alternator 38” length. Code 4 I-953-001 60886 Lycoming Generator 33.25” length. Code 4 I-953-002

$87.35 $87.27 $40.00

I-900-101

539547-31 Continental 31.19” length. Code 4

I-953-003

$180.00 $180.00 $180.00

LR3C-14 I-900-100 LS-1A I-900-101 SB1B-14 I-900-102

I-953-003

I-214-000

I-213-000

I-211-000

n Contactors by B & C Specialty Products These devices are suitable for a range of applications in experimental aircraft. The S701-1 and S701-2 contactors may be used where continuous-duty operation is required (i.e. as a battery master contactor, ground power contactor, alternator disconnect contactor or hydraulic landing gear system contactor). Each is supplied with spike supression diode(s). The S702-1 and S811-1 are intermittent- duty devices, for use as starter contactors. Both feature built-in spike suppression diodes and are capable of powering a “Starter Engaged” warning light in the instrument panel. The S811-1 has been especially selected for use with either of the B&C Starters. Description P/N Cat. No. Price 4-Terminal, Continuous Duty Contactor, 12V Code 8 S701-1 I-211-000 $39.50 Intermittent Duty Starter Contactor, 12V Code 8 S702-1 I-213-000 $33.95 Starter Contactor, 12V FAA/PMA’d Code 4 S811-1 I-214-000 $49.95

P/N

Cat. No.

Price

$185.00

Used on most Beech, Cessna, Piper and Mooney aircraft.

R1224 I-638-000

Check Out Our Webstore at wagaero.com