Spring/Summer 2018 - Wagaero

36 | onlinecatalog.wagaero.com | 1.800.558.6868 | Prices and Supplies are subject to change without notice

ENGINE PARTS

OIL TANK ACCESSORIES

n Air/Oil Mini Separators by Airwolf FAA Approved STC’d You get everything you need to install on the aircraft. The Black Mini Separator is epoxy powder coated inside and out. Inlets and outlets are beaded. Hoses, including the orange hi-temp SCAT tubing, are cut to length. Includes return fittings, reducer bushing, 90 degree fittings, Adel clamps, nuts, screws and washers. Shipped FOB Factory. Prepayment required. All Code 4 Applications P/N Cat. No. Price 5/8" Inlet AFC-W400 I-216-000 $454.50 3/4" Inlet AFC-W410 I-216-001 $454.50 1" Inlet AFC-W420 I-216-002 $454.50 Airwolf Air/Oil “AirSep” Separators, FAA Approved Airwolf has acquired the rights and STCs for the Walker Engineering Air/Oil Seperators. The Airwolf “AirSep” is now available for most general aviation aircraft. This unit is larger than most other air/oil separators, but is more effective. Kits come with everything you need to install it on the aircraft. When ordering please specify your aircraft make, model number, serial number and engine model number. Shipped FOB Factory. Prepayment Required. All Code 4 Cessna Skyhawk 172 I, K, L, M, P, Q & 172RG w/032 & 0360 engines (3/8” rocker box drain lines) AFC-W321-A I-219-000 $569.00 Piper PA-28-140, PA-28-151, PA-28-181, PA-28R-180, PA-28R-200 I-219-100 $569.00 Cessna 172N. P/N AFC-W321-B I-219-200 $569.00 I-216-000

I-899-000

I-245-001

I-899-100

n Lycoming 90 Degree Oil Filter Adapter Kit by B&C Specialty Products Description Cat. No. Price FAA Approved Fits Lycoming 0-235 through IO-720 engines. Includes mounting hardware, gasket and Champion CH-48108-1 filter. Weights 2.25 lbs. with the filter. Prepayment required. Shipped FOB. Shipping charges billed later. Code 4 Oil Filter Adapter Kit P/N BC-700-1 I-899-000 $450.00 Spacer Kit for Oil Filter Adapter Kit May be used with three sizes of spacers to move the adapter aft - all machined from a solid bullet of aluminum - facilitate installation on a wide range of aircraft. Kit includes hardware and additional mounting gasket. For BC700-1 and BC700-H only. P/N FK502-1.4 I-899-100 $55.00 n Lycoming Spin-on Kit FAA Approved Convert your engine to a spin-on filter. For Lyc. O-235, O-320 (except O-320- H2AD), O-340 and IO-720 series. Includes the spin-on oil filter. Adapter P/N 77852, 8-1/2” total length with filter. All Code 4 I-245-100 $564.50 Adapter Only I-245-001 $568.00 Spin-on Adapter Gasket I-245-003 $5.80

American Champion, Citabria, Decathlon, Super Decathlon, Scout w/032-AE10360 Vans RV-3, 4, 5, 6, 7, 8, 9 with 3/4” breather Stinson 108-1/2/3 with Franklin engines

$569.00

I-219-300

$398.00 $569.00

I-219-400 I-219-500

I-219-000

Other models available, please call for availability – 1-800-558-6868

n Approved Oil Coolers by Aero-Classics P/N FAA Approved Replacement For:

Stack Size

Code

Cat. No.

Price

Cessna: 150, 152, 170, 172, 175, 177. PA23, PA24, PA28, PA30. Niagara: 20002A, Harrison: 8526250, Piper: 18622-00

$310.00

4.5”H x 3.6”W x 6.5”L

4 I-820-000

n Lycoming Oil Filter Adapter Kits by Casper Labs Fits Lycoming engines from O-235 through IO-720 (except 76 series O-320 with single magneto drive). No hoses, fittings or brackets to contend with. 90˚ oil filter conversion kit includes gasket, two seals and detailed instructions.Average installation time is 1.5 hours. Uses 48108 oil filter listed above. Experimental Adapter Only. P/N CL1000A-EXP Code 8

8000075

n Experimental Oil Coolers by Positech P/N Application Stack Size

Port Height Code Cat. No.

Price

$289.00 $310.00

I-301-001 I-301-000

O-320, O-360 & IO-360. Niagara #20002, Harrison #8547332 O-360. RV Series Harrison #8544265 Stewart Warner #8406

4.6”H x 3.6”W x 6.5”L

8 I-819-100 $199.00

PC-4211

3.3”

Experimental Adapter w/CH48108-1 Kit Code 8

FAA/PMA’d/STC’d Adapter Only. P/N CL1000A-STC Code 4

$309.00

I-301-002

4.17”H x 3.6”W x 6.5”L 3.6”H x 3.6”W x 6.5”L

8 I-819-200 $199.00

PC-4212

2.8”

FAA/PMA’d/STC’d Adapter with CH48108-1 Kit. May require more parts for O-235 engine. Code 4

$332.00

I-301-100

Oil Filters on page 12

8 I-819-300 $199.00

PC-4213

O-360, O-320

2.3”

n Oil Tank Cover Kits

n Remote Mount Oil Filters by Airwolf NO MORE MESSY OIL CHANGES FAA/PMA approved on any single or multi engine aircraft up to 450 hp. Replaces original oil screen and housing. Provides oil line connections to remote mount full flow oil filter. Mounts on firewall. Easy to install, extends engine life and allows you to change oil in minutes. Lightweight, under four pounds. Hoses not included. All Code 4 Universal Lycoming Kit for Homebuilts P/N AFC-K001 STC’d Super Cub Kit , includes factory made, TSO’d hoses P/N AFC-K006. SALE! Price While Supply Lasts. STC’d Universal Lycoming Kit , fits all Lycoming engines (except I0720 series engine) using the 4 bolt oil screen housing on rear of an accessory case P/N AFC-K007-A STC’d Universal Continental Kit , fits A50, A65, A75, A80, C75, C85, C90, C125, O200, & IO240 engines P/N AFC-K008-A STC’d Universal Continental Kit , fits C145, O300, GO300 & IO360 P/N AFC-K008-B STC’d Universal Continental Kit , fits O470, IO470, IO520, TSIO520, GTSIO520 & IO550 engines, P/N AFC-K008-C

For most Cont. 65 thru 100 hp. Keep that engine warm! Easy to install. Quick snap on and off. Set of 4 induction sleeves included. 4 & 5 Qt. Kit 8 I-831-000 $59.75 6 Qt. Kit 8 I-832-000 $64.95

SET OF 4 INDUCTION SLEEVES INCLUDED

Oil Tank Plug 5/8”-18 fitting on bottom of oil tanks. Drilled for safety wire. 6 I-260-000

$1.50

Oil Tank Gaskets A must when replacing your tank. Reusable Silicone Gasket For Cont. P/N RG3577

$8.75 $4.85

4 I-231-000 4 I-206-000

Replacement Gasket, P/N SA3577

$540.00

I-999-000

n Dipsticks

$840.00

I-999-100

New manufactured oil tank dipsticks stamped with proper calibration markings. Made in the USA by Aero Fabricators. Long Neck designed for standard long neck oil tank. 8 I-944-000 $49.75 Short Neck designed for short neck oil tanks. 8 I-944-100 $49.75 Short Neck 6 Qt. designed for short neck 6 qt. oil tanks. For Cont. 0-200, C-90 application. 8 I-944-200 $49.75 ErcoupeStyleLongNeck,4-1/2quart 8 I-944-300 $45.00

I-944-000

$569.00

I-999-200

$569.00

I-999-300

I-944-100

$569.00

I-999-400

$569.00

I-999-500