Spring/Summer 2018 - Wagaero

Prices and Supplies are subject to change without notice | 1.800.558.6868 | onlinecatalog.wagaero.com | 87

WING, AILERON PARTS

n Metal Rib Wing Repair Kit FAA /STC’d Description Kit consists of 6 pcs. of 36”, 4 pcs. of 18” and 5 pcs. of 20” long material to properly repair main and nose ribs and uprights for Piper J-3 ribs. SALE! PA-18 Metal Spar Splice Kit Front P/N 750-738

Code

Cat. No.

Price

M-142-000 M-143-000

$107.90

4 M-315-000

M-145-000

M-140-000 M-141-000

$40.00

6 M-319-001

n Hall Brothers Vortex Generator Kit This generator has a lower stall speed, better rate of climb, and reduced takeoff and landing distances. Provides improved handling of the airplane in normal speed ranges. Includes enough Vortex Generators for a typical homebuilt wing and stabilizer (46 pairs curved & 16 pairs flat), tape for temporary attachment, adhesive for permanent attachment, and instructions. Made from .025” 6061-T6 aluminum 8 I-936-000

n J-3 Wing Root Fairings FAA/PMA’d All Code 4 Description Location OEM P/N Cat. No.

Price

Wing Root Fairing

LH 60803-00 M-138-000 RH 60803-01 M-139-000 ea. $42.50 LH 60772-00 M-140-000 RH 60702-01 M-141-000 ea. $43.85

$186.25

Fairing Top

n Clipped Wing Conversion Kit

Reed Clipped Wing Conversion Kit & Authorization. FAA Approved. Kit includes 26 pages of modification instructions, including rigging data and special tips on making conversion of the J-3 to the famous clipped-wing configuration. Special spar fittings and heavy-duty strut ends required for front and rear spar, both sides. Includes the copyright authorization and serial number. Adaptable to wood wing only. 4 M-274-000 $189.75

M-138-000

Rear Fairing Bottom LH 60782-00 M-142-000

RH 60782-01 M-143-000 ea. $37.00

Front Fairing Bottom LH 60792-00 M-144-000

RH 60872-00 M-145-000 ea. $39.85

Fairing Set

LH RH

M-131-000

M-139-000

M-132-000 ea. $158.00

STRUTS, FORKS & FAIRINGS

n Jury Struts, Clamps, Tiedown Assemblies Replica J-3 & PA-11 Parts Code

Cat. No.

Price

n Wing Strut Forks Conforms to AD. 81-25-05. High tensile strength strut fork has rolled threads and an improved alloy for added strength. These forks have a permanent identification mark to provide assurance of conformity for ease in field installation. Forks require a 500-hour inspection per AD. 99-01-05R1. Description Code Cat. No. Price J-3 and PA-11 Replacement for P/N 13770-00. Includes bolt, nut, cotter pin & jam nut. FAA/PMA’d 5/16” bolt hole, 7/16 x 20 thread NF3 4 M-036-000 $99.25 Attachment Bolt 5 M-036-100 $17.00 Attachment Nut 5 L-699-154 $.95 Cotter Pin 5 L-699-250 $.04 Jam Nut 5 L-699-357 $.37 J-5 and PA-12, 14, 16, 18, 20 & 22 Replacement for P/N 14481-02. Includes bolt, nut, cotter pin and jam nut. FAA/PMA’d 3/8” bolt hole 7/16 x 20 thread NF3 4 M-271-000 $92.00 Attachment Bolt 5 M-271-100 $8.50 Attachment Nut 5 L-699-173 $1.17 Cotter Pin 5 L-699-356 $.35 Jam Nut 5 L-699-357 $.37 n Sealed Lift Struts FAA/PMA’d All struts below are oiled and sealed. Using 4130 Streamline tubing, J-3 front and rear lift struts are manufactured to revision levels and installed per AD-93-10-06 are an FAA approved alternate means of compliance and is considered terminating actions for repetitive inspection requirement of AD-99-01-05. Description Code Cat. No. Price J-3, Front, includes jury strut clamps, original size 7/16 x 20 thread. 2.67” x 1.44” x .049 4 M-111-100† $654.90 J-3, Rear, includes jury strut clamps, original size 7/16 x 20 thread. 1.78” x 1.06” x .049 4 M-112-100† $536.90 J-3, Front, Clip Wing Strut w/clamps, original size 7/16 x 20 thread. 4 M-562-100 ¨ $549.00 J-3, Rear, Clip Wing Strut w/clamps, original size 7/16 x 20 thread. 4 M-563-100 ¨ $549.00 M-036-100 M-036-000

Jury Strut Clamps Fits only Wag-Aero’s PMA’d lift struts Cat. Numbers M-111-100 & M-112-100. Will not fit original J-3s. Includes one each front and rear clamp with attaching cleats. For one side of aircraft. Set of Clamps FAA/PMA’d

M-419-001

M-419-002

$51.50 $34.50 $25.00 $29.50

4 M-419-000 4 M-419-001 4 M-419-002 8 M-419-004

Front Clamp Only FAA/PMA’d Rear Clamp Only FAA/PMA’d

Rear Clip Wing Clamp.

Jury Strut Clamp Spacer Use with Cat. No. M-419-000, 001 & 002 only.

$16.75

8 M-419-003

Compression Strut Fitting For fabrication of the 3/4” tubular compression struts.

¨ Oversize shipping charges apply.

8 M-325-000 ea. $26.00 10 OR MORE ea. $20.41 Tie-down Ring Assembly, FAA/PMA’d. Fits PA22-108, 135, 150; PA-22-160; PA-22S-160 Piper strut type wings. Individual Assembly 4 M-265-000 $40.50 Set of Two 4 M-265-100 $77.00

M-363-001

M-363-002 M-363-005

Jury Struts All Code 4

Replaces OEM P/N Cat. No.

Price

$122.00 $106.50 $98.00 $64.00

Jury Strut with pitot tube, front Jury Strut w/o pitot tube, front Jury Strut w/o pitot tube, rear

12931-00 12571-02 12571-03 12591-00

M-363-001 M-363-002 M-363-005 M-363-004

Jury Strut Interconnect

Jury Strut Fittings (Set of 4)

$74.60

12581-00

M-363-003

n Wing Strut Barrels Build your own struts using these

$56.25

weldable barrels. Fits Wag-Aero’s Catalog Nos. M-036-000 & M-271-000 strut forks.

8 M-324-100