WiredInUSA May 2016

Using Zumbach’s Wallmaster measurement and control systems, manufacturers can economize their expenditure of raw materials. The ROI is achieved within a few months. The use of these systems also allows reduction of the start-up time.

measurement of cable jackets, tubes and hoses.

A complete line of measurement and control equipment for any on-line and manufacturing process will also be on display: • New 1, 2 and 3 axis diameter gauges of the high precision ODAC ® series for any wire and cable. New models with special beamgeometry, fault detection function and high scan rate • The advanced ODEX ® concentricity and diameter gauge for wire extrusion. Fully non-contact, based on magnetic and laser technology • New LSV length and speed gauges for down-to-zero speed measurement • New spark tester AC and DST systems • Advanced KW fault detectors with new local BAE control and display unit • New economic, modular high performance USYS IPC data acquisition, processing and display units • Rayex ® D series: Zumbach’s X-ray measuring and control system for CV lines, for wall thickness (three layers), eccentricity and diameter/ovality for CV lines • Profilemaster ® series: high-end, non-contact profile and shape measurement, combining laser and CCD technology for shaped wire and any other profile

One of the highlights on the stand will be the new ultrasonic scanners for flexible diameter adjustment. In this novel construction (patent pending) the traducers can be either individually or simultaneously adjusted to thebest possible measuring position within seconds. The scanners represent a smart and simple solution for full non-contact, in-line eccentricity and wall thickness S S 3-axis ODAC 550 system, measuring an offshore cable of 500mm OD

Zumbach Electronic AG – Switzerland Website: www.zumbach.com

wiredInUSA - May 2016

58