Schaublin_Catalogue
Page - Seite 6.4
Tolérances de battement radial des tasseaux expansibles monobloc Rundlauftoleranzen von Monobloc-Spreizdorne Radial runout tolerances (concentricity) for expanding arbors
maxi
Remarques
Pour obtenir la précision désirée, surtout lors de l'utilisation des produits "UP", nous conseillons de ne pas serrer des pièces avec tolérance de l'alésage supérieure à ISO H8.
Bemerkungen
Um die angegebenen Rundlauftoleranzen einzuhalten, empfehlen wir die Bohrungstoleranz von ISO H8 am Werkstück nicht zu überschreiten.
Remarks
To obtain required accuracy, particularly for "UP" products, do not clamp parts with a bore tolerance above ISO H8.
D
L
maxi
maxi
Alésage Bohrung
Bore
Standard
UP
au-dessus
jusqu'à
Ultraprécision Höchstpräzision Highest precision
over über
bis
up to
0.008 0.010 0.010 0.012 0.015 0.015
6
0.015 0.020 0.020 0.025 0.030 0.030
6 10 18 30 50
10 18 30 50
-
Copyright © 2017 SCHAUBLIN S.A., All Rights Reserved www.schaublin.ch 476-4800 Edition 01/2017
Made with FlippingBook HTML5