2018 Edge Owner Manual

Maintenance

Checking the Transmission Fluid Level * Only check the transmission fluid level when the engine is at normal operating temprature 179°F (82°C)-199°F (93°C). Normal operating temprature is reached after driving approximately 20mi (30 km).

Low Fluid Level If the fluid level is within the minimum range (below point A) add the correct specification fluid to be within the hash mark area. See Capacities and Specifications (page 332). Note: If the fluid level is below the minimum range do not drive your vehicle. An underfill conition can damage the transmission. Correct Fluid Level If the fluid level is within the hash mark area (between points A and B) do not add any fluid. High Fluid Level If the fluid level is above the maximum range (above point B) fluid may need to be removed. High fluid levels may be caused by a overheating condition. If you have operated your vehicle at high speeds, towing a trailer or in city traffic during hot weather, allow your vehicle to cool for a minimumof 30minutes before rechecking the level. Note: An overfill conition can damage the transmission. Adding Transmission Fluid * 1. Rotate the automatic transmission fluid cap in a counterclockwise direction. * 2. Remove the cap and dipstick andwipe it with a clean, lint-free cloth. 3. Add fluid that meets the Ford specifications. See Capacities and Specifications (page 343). Pour the fluid directly into the automatic transmission fluid cap and dipstick hole. 4. Replace the cap and dipstick and remove it again to check the fluid level.

A B

E190273

A

Minimum Maximum

B Note: Check the fluid level with the engine running and the transmission in park (P). 1. Make sure that your vehicle is on level ground. 2. Rotate the automatic transmission fluid cap in a counterclockwise direction. See UnderHoodOverview (page 269). 3. Remove the cap and dipstick andwipe it with a clean, lint-free cloth. Replace the cap and dipstick and remove it again to check the fluid level. 4. Make sure that the fluid level is between the MIN and the MAX marks. If the fluid level is at the MINmark, add fluid immediately. See Adding Transmission Fluid . 5. Replace the automatic transmission fluid cap anddipstick. Turn it clockwise until you feel a strong resistance.

277

Edge(CDQ)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201706,FirstPrinting