2018 Edge Owner Manual

Wheels and Tires

When driving with the full-size dissimilar spare wheel and tire assembly additional caution should be given to: • Towing a trailer. • Driving vehicles equipped with a camper body. • Driving vehicles with a load on the cargo rack. Drive cautiously when using a full-size dissimilar spare wheel and tire assembly and seek service as soon as possible. Tire Change Procedure (If Equipped) WARNINGS When one of the front wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the transmission is in park (P). the parking brake and use an appropriate block or wheel chock to secure the wheel diagonally opposite to the wheel being changed. For example, when changing the front left wheel, place an appropriate block or wheel chock on the right rear wheel. No person should place any portion of their body under a vehicle that is supported by a jack. Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications. If you are unsure if the jack capacity is adequate, contact the authorized dealer. To help prevent your vehicle from movingwhen changing awheel, shift the transmission into park (P), set

WARNINGS Make sure there is no grease or oil on the threads or the surface between the wheel lugs and nuts. This can cause the lug nuts to loosen while driving. Note: Passengers should not remain in your vehicle when the vehicle is being jacked. 1. Park on a level surface, set the parking brake and activate the hazard flashers. 2. Place the transmission in park (P) and turn the engine off.

E175447 3. Block both the front and rear of the wheel diagonally opposite the flat tire. For example, if the left front tire is flat, block the right rear wheel. 4. Lift and remove the carpeted load floor panel to access theminispare and jack kit. 5. Remove the steel winged washer nut securing the spare tire by turning it counterclockwise. 6. Remove the spare tire from the spare tire compartment. 7. Remove plastic wing nut and jack and lug wrench assembly. Detach lug wrench from jack by turning the jack hex nut drive screw counterclockwise.

328

Edge(CDQ)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201706,FirstPrinting