Overhead Deadends (DA) - Distribution Connectors

DEADENDS BOLTED QUADRANT STRAIN CLAMP ALUMINUM

DA 15

ALUMINUM SD

For high tension transmission line construction with all aluminum, ACSR or aluminum alloy conductor.

Material:

Body and Keeper — 356-T6 Aluminum Alloy Hardware — Galvanized Steel Sockets and Clevises — Ductile Iron, Galvanized Cotter Pin — #302 Stainless Steel

DIMENSIONS INCHES (MM)

CATALOG NUMBER

L

W H

C

K PD

9-1/16 (230.19) 10-1/4 (260.35) 11-1/4 (285.75) 13-1/8 (333.38) 14 (355.6) 15-1/2 (393.70) 17 (431.80)

3/4 (19.05) 15/16 (23.81) 1-1/16 (26.99) 1-3/8 (34.93) 1-7/16 (36.51) 2 (50.8) 1-7/8 (47.63)

6-3/4 (171.45) 8-3/8 (212.73) 9-5/8 (244.48) 13-1/8 (333.38) 15-3/4 (400.05) 18 (457.20) 11-1/2 (292.1)

5-1/8 (130.18) 6-1/2 (165.10) 7-3/8 (187.33) 8-1/4 (209.6) 9-1/2 (241.3) 12-3/8 (314.32) 12-3/8 (314.32)

1-1/4 (31.75) 1-1/4 (31.75) 1-1/4 (31.75) 1-3/8 (34.33) 1-1/2 (38.10) 1-1/2 (38.10) 1-1/2 (38.10)

5/8 (15.88) 5/8 (15.88) 5/8 (15.88) 3/4 (19.05) 3/4 (19.05) 3/4 (19.05) 1 (25.40)

SD57

SD70

SD86

SD112

SD130

SD155

SD185

FITTING

CLAMPING RANGE

U-BOLTS

ULTIMATE BODY STRENGTH LBS. (KN)

APPROX. WT. EACH LBS. (KG) 3.2 (1.45) 4.4 (2.00) 4.8 (2.63) 4.7 (2.14) 6.0 (2.72) 6.4 (2.90) 5.4 (2.45) 6.8 (3.09) 7.1 (3.22) 8.4 (3.81) 9.9 (4.5) 10.4 (4.73) 13.2 (6.00) 15.3 (6.95) 15.5 (7.04) 15.5 (7.00) 17.3 (7.85) 17.3 (7.85) 21.0 (9.53) 22.7 (10.30) 22.3 (10.11)

CATALOG NUMBER

CAT. NO.

INCHES (MM)

SIZE INCH- ES (MM)

TYPE None Socket Clevis None Socket Clevis None Socket Clevis None Socket Clevis None Socket Clevis None Socket Clevis None Socket Clevis

ACSR ALUMINUM

NO.

SD57N SD57S SD57C SD70N SD70S SD70C SD86N SD86S SD86C SD112N SD112S SD112C SD130N SD130S SD130C SD155N SD155S SD155C SD185N SD185S SD185C

- SA04 CA04 - SA06 CA06 - SA07 CA06 -- SA1013 CA1013 -- SA1013 CA1013 -- SA1613 CA1613

#4-6/1 To 266.8-26/7 #2-7/1 To 397.5-37 Str. #3/0-6/1 To 556-26/7 #3/0-6/1 To 954-54/7 336.4-26/7 To 1272-54/19 1,033.5 (36/1) To 1510.5 (54/19) 1,192.5 (45/7) To 2,156 (84/19)

#4-7 Str. To 300-37 Str. #1-7 Str. To 397.5-37 Str. 3/0-19 Str. To 650-61 Str. 40-19 Str. To 1033.5-61 Str. 397.5-19 Str. To 1431-61 Str. 1,100-91 Str. To 1,700-127 Str. 1,272-61 Str. To 2,500-127 Str.

.20-.64 (5.08-16.26)

15,000 (67)

1/2 (12.70)

3

.30-.75 (7.62-19.05)

20,000 (89)

1/2 (12.70)

4

.46-.94 (10.16-23.88)

25,000 (111)

1/2 (12.70)

4

30,000 (133) 30,000 (133) 25,000 (111) 35,000 (156) 30,000 (133) 25,000 (111) 35,000 (156) 30,000 (133) 25,000 (111) 50,000 (222) 30,000 (133) 30,000 (133)

.50-1.20 (12.80-30.48)

1/2 (12.70)

5

.70-1.39 (17.78-35.30)

5/8 (15.88)

5

1.18-1.52 (29.97-38.61)

5/8 (15.88)

5

-- SA1417 CA1517033

1.30-1.85 (33.02-46.99)

5/8 (15.88)

5

NOTES:

(1) Sag Eye Ultimate Strength is 60% of Clamp strength without fitting. (2) Rated slip strength as a % of conductor RBS varies with conductor type, size and stranding. Minimum slip strength rating on standard strength conductors is 40% RBS (Partial Tension). For most standard strength conductors, minimum slip strength of this clamp series is 60% RBS (Normal Tension). (Consult factory for slip strength test data on specific clamp & conductor combinations.) (3) Recommended torque on u-bolts: 1/2” -- 480 in-lbs., 5/8” -- 720 in-lbs. (4) Bolt and Nut may be substituted for clevis pin by adding suffix “BNK” to catalog number. (5) For corona-free applications on EHV lines, add suffix “CRF” to catalog number. Example SD130NCRF.

ANDERSON ™

HUBBELL ® POWER SYSTEMS

FARGO ®

December 2014