Overhead Deadends (DA) - Distribution Connectors

DEADENDS BOLTED IN-SPAN NEUTRAL TAPS ALUMINUM

DA 31

ALUMINUM GM100

Fargo in-span taps offer a wide range of neutral connections on open wire or multiple cable secondaries. • A wide angle bell mouth opening permits tap offs up to 45° in either direction from the center line of the clamp. • Constructed of high strength aluminum alloy these clamps pro- vide a minimum holding power of 1250 pounds. • Long contoured contact surfaces protect the neutral from the pull of the service. • Using less parts than conventional units, these taps are available for one, two or four service dead end connections.

Material:

Body Casting – Aluminum Alloy Hardware – Stainless Steel

Note:

Add suffix “L” to catalog number for inhibitor

protection and individual packs. Ex. – GM102AL

Product Data & Conductor Size

RUN

TAP

APPROX. OVERALL DIMENSIONS INCHES

CATALOG NUMBER

NO. OF TAPS

LENGTH (MM)

WIDTH (MM)

HEIGHT (MM) 2-3/4 (69.85)

MAX.

MIN.

MAX.

MIN.

3-3/8 (85.72)

1-1/2 (38.1)

GM102A

4/0 ACSR

1/0 ACSR

2 ACSR

6 ACSR

1

ALUMINUM MID-SPAN CONNECTOR TYPE MSNT

ALUMINUM MSNT

For aluminum or ACSR triplex conductor. Has a double take-off loop. Bolts are peened to make nut captive.

Material:

Body — Top Member-Aluminum Alloy Bottom Member — Bronze Alloy-Tin Plated Hardware — Galvanized Steel

Product Data & Conductor Size

APPROX. WEIGHT LBS. (KG)

CONDUCTOR RANGE (AWG)

DIMENSIONS INCHES (MM)

CATALOG NUMBER

NEUTRAL

PHASE

L

J

DIA.

4-11/16 (119.09)

3/8 (9.52)

7/8 (22.22)

.64 (.29)

MSNT2

1/0-4/0 ACSR #6-1/0 AAC OR ACSR

ANDERSON ™

HUBBELL ® POWER SYSTEMS

FARGO ®

December 2014