2018-Ford-Expedition-Owners-Manual

Brakes

When the system is active, your vehiclewill remain stationary on the slope for two to three seconds after you release the brake pedal. This allows you time to move your foot from the brake to the accelerator pedal. The brakes release automatically when the engine has sufficient torque to prevent your vehicle from rolling down the grade. This is an advantage when pulling away on a slope, for example from a car park ramp, traffic lights or when reversing uphill into a parking space. The system will activate automatically on any slope that will cause significant vehicle rollback. For vehicles with a manual transmission, you can switch this feature off using the information display. See Information Displays (page 109). The systemwill remain on or off depending on how it was last set. Note: There is no warning lamp to indicate the system is either on or off. Note: If your vehicle is equipped with Auto Hold, Hill Start Assist will not be available while Auto Hold is active. Using Hill Start Assist 1. Bring your vehicle to a complete standstill. Keep the brake pedal pressed and select an uphill gear (for example, drive (D) or first (1) when facing uphill or reverse (R)when facing downhill). 2. If the sensors detect that your vehicle is on a slope, the system will activate automatically. 3. When you remove your foot from the brake pedal, your vehicle will remain on the slope without rolling away for about two or three seconds. This hold time will automatically be extended if you are in the process of driving off. 4. Drive off in the normal manner. The brakes will release automatically.

3. Press the accelerator pedal until you feel that the engine has developed enough power to move the vehicle, then release the electric parking brake switch. BatteryWith No Charge WARNING You will not be able to apply or release the electric parking brake if the battery is low or has no charge. If the battery is low or has no charge, use jumper cables and a booster battery. HILL START ASSIST WARNINGS The system does not replace the parking brake. When you leave your vehicle, always apply the parking brake and shift the transmission into park (P) for automatic transmission or first gear for manual transmission. You must remain in your vehicle when the system turns on. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. Failure to take care may result in the loss of control of your vehicle, serious personal injury or death. Note: If the engine is revved excessively, or if a malfunction is detected, the systemwill be deactivated. The systemmakes it easier to pull away when your vehicle is on a slopewithout the need to use the parking brake.

205

Expedition(TB8)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201707,FirstPrinting