Control Catalog Flippingbook

NEMA FULL VOLTAGE POWER DEVICES, CONTROL SECTION 1

1-98

— CR412 magnetic starters 2 Speed – 1 winding, thermal magnetic circuit breaker Part number configuration Valid for NEMA sizes 0-4

Step 7 (digit 15) select push button/selector switch Push Button/Selector Switch - Heavy Duty

Code

None

A

Fast/Slow/Stop Push Button High/Low/Off Push Button

J

K L

High/Low Push Button & HOA Selector Switch Fast/Slow Push Button & HOA Selector Switch HOA & Slow/Fast Selector Switches HOA & Low/High Selector Switches Slow-Off-Fast Selector Switch Low-Off-High Selector Switch Fast-Slow-Off-Auto Selector Switch High-Low-Off-Auto Selector Switch Step 8 (digit 16) select pilot device Pilot Light (Heavy Duty CR104P Style) Type

M

P R T U V

W

Code

Color - Functionality

None

A K L X 2 3 5 S T Y

Red & Amber Across Coils Red & Green Across Coils

Standard Lights

Red & Amber Across Coils & Unwired Green

Red & Amber Across Coils Red & Green Across Coils

LED Lights

Red & Amber Across Coils & Unwired Green

Red & Amber Across Coils Red & Green Across Coils

Push-To-Test Lights

Red & Amber Across Coils & Unwired Green

Step 9 (digit 17) select control options Device

Code

None

A

1 Relay, 2NO-2NC, 24/120V Coil - unwired

B 5 C 5

2 Relays, 24/120V Coil - unwired DIN Rail - for Customer Use

D E

12 Point Terminal Strip - unwired (12 PT Strip)

Space Heater w/ NC Contact

H 6

1 Relay + 12 PT Strip 2 Relays + 12 PT Strip

J 5

K 5 L 6

DIN Rail + 12 PT Strip + Space Heater 2 Relays + 12 PT Strip + Space Heater

M 5,6

Time Delay ON Relay, 24/120V Coil - unwired (TD) Time Delay OFF Relay, 24/120V Coil - unwired (TD)

N 5 P 5 R 5 S 5

12 PT Strip + TD ON 12 PT Strip + TD OFF

12 PT Strip + Space Heater + TD ON 12 PT Strip + Space Heater + TD OFF

T 5,6 U 5,6

5 Relay/Timer coil voltage is equivalent to CPT secondary voltage. Requires minimum 100 extra VA CPT option. 6 Maximum number of auxiliary contacts shall be reduced by 1.

GENERAL NOTE: On NEMA Size 3 & 4 starters, if selecting factory installed and wired operator devices (Push Buttons, Selector Switches, and/or Pilot Lights) then control circuit fusing, a control power transformer, or 120V separate sourced control is required when the protective device is rated greater than 100 Amps.

Made with FlippingBook HTML5