Control Catalog Flippingbook

1-111

NEMA FULL VOLTAGE POWER DEVICES, CONTROL SECTION 1

— CR415 magnetic starters 2 speed – 2 winding, nonfusible and fusible disconnect type Part number configuration Valid for NEMA sizes 0-4

Step 9 (digit 17) select control options Device

Code

None

A

1 Relay, 2NO-2NC, 24/120V Coil - unwired

B 5 C 5

2 Relays, 24/120V Coil - unwired DIN Rail - for Customer Use

D E

12 Point Terminal Strip - unwired (12 PT Strip)

Space Heater w/ NC Contact

H 6

1 Relay + 12 PT Strip 2 Relays + 12 PT Strip

J 5

K 5 L 6

DIN Rail + 12 PT Strip + Space Heater 2 Relays + 12 PT Strip + Space Heater

M 5,6

Time Delay ON Relay, 24/120V Coil - unwired (TD) Time Delay OFF Relay, 24/120V Coil - unwired (TD)

N 5 P 5 R 5 S 5

12 PT Strip + TD ON 12 PT Strip + TD OFF

12 PT Strip + Space Heater + TD ON 12 PT Strip + Space Heater + TD OFF

T 5,6 U 5,6

5 Relay/Timer coil voltage is equivalent to CPT secondary voltage. Requires minimum 100 extra VA CPT option. 6 Maximum number of auxiliary contacts shall be reduced by 1.

GENERAL NOTE: On NEMA Size 3 & 4 starters, if selecting factory installed and wired operator devices (Push Buttons, Selector Switches, and/or Pilot Lights) then control circuit fusing, a control power transformer, or 120V separate sourced control is required when the protective device is rated greater than 100 Amps.