Control Catalog Flippingbook

3-35

LIGHTING CONTACTORS, CONTROL SECTION 3

— CR160MC Modified assembled forms - mechanically held

Product number selection instructions Order by complete product number

CR160MC Mechanically held contactors Follow the diagram below and tables on pages 3-36 through 3-38 to select the options and corresponding product number digits for your modified contactor.

CR160MC

1

2

3

4

5

6

7

8

9

10

1: Ampere ratings

10: Auxiliary contacts 2

2: Enclosure type

9: Pilot lights

3: Coil & control voltage 1,2

8: Pilot devices

4: Coil & control voltage 1,2

7: Control circuit

5: Poles & neutral 2,3

6: Factory wired option

1 Separate control voltages may be ordered. 2 When no auxiliary contacts are needed with an Open Bus Mounting and Open Sub-Panel device, the 12 digit product number must be ordered. If auxiliary contacts are required, digits 13 through 16 must be “ACAA” and digit 17 should reflect the needed contacts. 3 Replace digits 2 or A for 2 or 3 poles with correct digit if a neutral terminal board is required. Neutral terminal board is not available with flush mount or sub panel with baseplate controllers.