A06 Stud Lock TDS 2017
TECHNICAL DATA SHEET FOR A06
CURE SPEED VS. BOND GAP The rate of cure will depend on the bond gap. Threaded fasteners gap size is depending on thread type and quality. The graph below shows shear strength developed with time on steel collars and pins at different controlled gaps and tested according to ISO 10123.
A06 is designed for the sealing and locking of threaded fasteners. The product is a single component anaerobic, high strength, acrylic based thread locker. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.
A06 CHARACHTERISTICS Technology Appearance (uncured)
Chemical Form Fluorescence
Positive under UV
Single – requires no mixing
CURE SPEED VS. TEMPERATURE The rate of cure is dependent on the ambient temperature. The graph below shows the breakaway strength developed with time at different temperatures on M10 steel bolts and nuts and tested according to ISO 10964.
A06 is particularly suitable for uses including heavy duty applications, such as nuts onto studs in pump housings and studs into motor housings. Used also on other fasteners where maximum strength is required.
PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 C
Viscosity @ 25 C
400 – 600 cPs
Flash Point Fixture Time
CURE SPEED VS. ACTIVATOR Where the cure speed is unacceptably long or large gaps are present. An activator can be applied to the surface which will improve cure speed .
CURE SPEED VS. SUBSTRATE The rate of cure is dependent on substrate used. The graph below shows the breakaway strength developed with time on M10 steel bolts and nuts compared to different materials and tested according to ISO 10964.
TYPICAL PERFORMANCE OF CURED MATERIAL
Typical Value -54 C - 150 C
Operating Temp C
(After 24 hr at 20-25 C) on M10 steel nuts & bolts)
Breakaway Torque M10 steel bolts & nuts ISO 10964 Prevail Torque M10 steel bolts & nuts ISO 10964
Made with FlippingBook flipbook maker