Pole Line Hardware (5)

5-21

CLAMPS, GUY OFFSET This two-bolt guy clamp with curved clamping member provides a more positive hold on the guy strand. Available with 1 / 2 " or 5 / 8 " bolts. Hot dip galvanized.

Approx.Ship Wt. Lbs. Per 100 Pcs.

Dimensions in Inches

Catalog No.

Bolt Dia.

No. 6409

Length 3 1 / 4

Width 1 1 / 2 1 5 / 8

Strand Size 3 / 16 thru 5 / 16 5 / 16 thru 1 / 2

†6409 †6410

135 172

1 / 2 5 / 8

4    

†RUS listed

CLAMPS, LASHING WIRE, TYPE E Clamp is fitted with a special clamp bolt formed with a shoulder to pre vent turning while tightening. Both ends of the 1 / 4 " bolt are peened to prevent loss of nuts during shipment or handling. Hot dip galvanized.

Approx. Ship Wt. Lbs. Per 100 Pcs. 17

Dimensions in Inches

Catalog No. †9000

Strand Size 1 / 4 thru 7 / 16

Length 1

Width 1

No. 9000

†RUS listed

CLAMPS, SUSPENSION Clamps are used with through bolts to support cable at poles. Through bolt also serves as clamping member. One or more nuts and/or washers are used between the pole and clamp for required spacing. No. 7901 is used on very light cables. This one bolt clamp consists of the two clamping members only. Nos. 7902L and 7902R are used at corners and angles. Nos. 7903 and 7904 are used on straight runs.

Approx. Ship Wt. Lbs.

Dimensions in Inches

Catalog

Accommo dates

Center Hole Dia. 11 / 16

Per 100 Pcs.  75

Type 1-Bolt Straight Susp 3-Bolt Angle Susp. 3-Bolt Angle Susp 3-Bolt Straight Susp. 3-Bolt Straight Susp. 3-Bolt Straight Susp.

Length 2 1 / 2

Number  7901 

No. 7902R

Strand Size 1 / 4 thru 7 / 16

232

7  

11 / 16

 7902L

1 / 4 thru 7 / 16

232

7 

13 / 16

 7902R

1 / 4 thru 7 / 16

178

5 5 / 8

11 / 16

 7903 

1 / 4 thru 7 / 16

177

5 5 / 8

11 / 16

*7903L

1 / 4 thru 7 / 16

212

5 5 / 8

13 / 16

 7904 

1 / 4 thru 7 / 16

*Flat Keeper Plate

No. 7903L

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017

Made with FlippingBook HTML5