Pole Line Hardware (5)

5-38

PLATES, CROSSARM REINFORCING Reinforcingplates prevent damage to the crossarmfromtightenednuts. Nos. 4045 and 4047 have a pressed rib and are normally used on the side of the crossarm to prevent the tightened nut from causing checking or splitting. No. 4063 is used on top or bottom of flat-top crossarms to impede the strain from forged steel pins.

Dimensions in Inches

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No.

Steel Thickness 3 / 16 1 / 4 7 Ga.

Crossarm Size 4 x 5 6 x 8 3 3 / 4 x 4 3 / 4

Hole Dia. 13 / 16 15 / 16 13 / 16

No. 4063

 4045 †4047  4063

166 276 115

†RUS listed

PLATES, LIFT AND LOAD Used to protect poles on heavy down guying when Thimbleye, Angle Thimbleye or Oval-Eye bolts are used through the pole. Hot dip galvanized.

Approx. Ship Wt. Lbs. Per 100 Pcs. 98

Size Holes, Inches Bottom

Catalog No.  PS7887

Plate Size, Inches 3 / 16 x 2 1 / 2 x 7 1 / 4 x 2 1 / 2 x 7 3 / 16 x 2 1 / 2 x 7 1 / 4 x 2 1 / 2 x 7

Description 2-Hole Lift 2-Hole Lift 3-Hole Lift 3-Hole Lift

Top 9 / 16 9 / 16 9 / 16 9 / 16

3 / 4 x 1 7 / 8 x 1 3 / 4 x 1 7 / 8 x 1

7888  7897 †7898

126  97 126

†RUS listed

No. 7897         No. 7887

PLATES, STRAIN Strain Plates are used to prevent pole from being damaged by guy wire. Nail holes at corners are 3 / 16 " diameter. Hot dip galvanized steel plates are formed to 5" radius.

Catalog No. †*6575

Dimensions, Inches 4 x 8 x 14 Ga.

Approx. Ship Wt. Lbs. Per 100 Pcs. 116

Type Standard

No. 6575

†RUS listed *NEMA Standard

RACKS, SECONDARY Medium and Heavy Types These racks have fabricated steel points that are permanently welded to the rack bases. The entire unit is hot dip galvanized. Insulators are not included.

Dimensions in Inches

Approx. Ship Wt. Lbs. Per 100 Pcs.

Catalog No.

No. of Wires

End Mtg. Hole Spacing

Overall Length., Back

Width of Back

MediumType, Extended Back, 12 Gauge 2 3 4 16 24 32 18 26 34 2 7 / 8 2 7 / 8 2 7 / 8 Heavy Type, Nonextended Back, 9 Gauge

C2070049   C2070047* C2070048*

 460  660  880

21 3 / 4 29 3 / 4

3 1 / 4 3 1 / 4

C2070050* C2070051*

3 4

16 24

 700 1020

Heavy Type, Extended Back, 9 Gauge

3 1 / 4

C2070052*

3

24

26

 800

C2070047

*ANSI Standard

HUBBELL ® Power Systems

CHANCE – CENTRALIA, MISSOURI MARCH 2017