WCA September 2007

wire Southeast Asia

Comfortable to hold and simple to operate, they have capacities ranging from 0.10mm to 1.80mm copper/ aluminium. The BM10 and BM30 models use industry standard dies to provide a reliable weld on

❍ PS Costruzioni Meccaniche Srl Booth J09

In 1960 PS Costruzioni Meccaniche Srl started manu- facturing cable take-ups and pay-off stands for the major Italian cable manufacturers, expanding to produce semi- automatic coiling/spooling lines rewinding lines. Production then experienced another important step, thanks to the introduction of fully automatic coiling/spooling lines, and since then the company has established itself as one of the most important cable packaging systems manufacturers. The company’s semi-automatic lines – models PS 80 MBN and PS 85 MBN are still a relevant part of the business and demand has remained stable in the market over the years. PS 80 technical characteristics : multiple insulated flexible cables having an OD from 1mm-6mm multiple insulated solid cables having an OD from 1mm- 4mm Production : 0.75-1.5 coils/spools 100m/min dependent on the operator and the wire type to be wound. The minimum section flexible cable is 3 x 0.75mm 2 ; max section, up to a semi- solid cable 1 x 50mm 2 . The max linear speed is 400m/min. PS 85 technical characteristics : multiple insulated flexible cables having a diameter from 4mm-15mm multiple insulated solid cables with a diameter up to 10mm (size 35mm 2 ) flat cables 16 x 7 Production : 0.75-1.5 coils/spools 100m/min dependent on the operator and the wire type to be wound. Min section flexible cable 3 x 0.75mm 2 ; max section semi-solid cable 1 x 50mm 2 . The maximum linear speed is 400m/min. • • • • •

Cold pressure welding equipment from PWM m

materials with capacities of 0.10mm to 1.80mm. They can be used either mounted on a workbench or a mobile trolley. Light hand pressure on the operating lever completes the weld in seconds. The largest machine on show, the M101, is a strong, heavy-duty machine, which is simple to operate and easy to maintain, due to the small number of component parts. One of PWM’s best-selling models, the M101, which has a capacity of 1.00 to 3.60mm copper and 1.00 to 5.00mm EC aluminium, can be bench-mounted or supplied with a trolley for portability and convenience. The PWM range also includes powered air/hydraulic, electro/pneumatic and electro/hydraulic cold welders, with capacities from 1.00mm up to 25mm copper and 30.00mm aluminium. Pressure Welding Machines – UK Fax : +44 1233 820591 Email : pwm@btinternet.com Website : www.pwmltd.co.uk

PS Costruzioni Meccaniche Srl – Italy Fax : +39 039 689 8769 Email : ps@pscostruzioni.com Website : www.pscostruzioni.com

❍ Pressure Welding Machines Booth E03

PWM, a leading designer and manufacturer of cold pressure welding equipment and dies, will exhibit its comprehensive range of top quality manual welders. The range includes hand-held, bench and trolley-mounted models, with capacities ranging from 0.10mm up to 3.60mm copper and 5.00mm aluminium. Durable, reliable and easy to use, PWM manual welders will join non-ferrous wire and strip quickly and cost-effectively without heat, flux, fillers or fumes. No set up time is required and the bond created is stronger than the parent material. The M10, M25 and M30 hand-held portable machines are ideal for repairing wire breaks quickly and efficiently in confined spaces.

wire Southeast Asia - Bangkok International Trade and Exhibition Centre 16 th -18 th October 2007

113