710007BLPK 10cc Easy Flow Piston TDS

710007BLPK 10cc Easy Flow Piston TDS

DATA SHEET

710007BLPK Blue Easy Flow PE Piston 10cc

Product Description

Technical Information

Part 710007BLPK is a 10cc/ml size polyethylene air piston with easy flow fit to syringe barrel to reduce drips and oozing. It consists of a moulded blue polyethylene piston suitable for use with our 10cc syringe barrels (700 series) with SyringeGuns and air powered dispensers.

Piston Size:

10cc/ml

Colour:

Blue

Diameter:

15.70 mm

Height:

13.00 mm

Construction:

Polyethylene

Typical Applications

Options

Use this small 10cc piston for dispensing of most low, medium and high viscosity fluids including adhesives, solvents, inks, paints, primers, activators, lubricants, pastes and gels. The piston has a light fit inside the barrel which reduces the effect of stringing or oozing.

The 710007BLPK polyethylene pistons are also available in a syringe assembly pre-filled with the adhesive, paste, liquid of your specification. We can provide the syringes in sealed packs with no air entrapment. We also have bench standing syringe filling systems available to fill this product.

Instructions

Packaging

1. Insert piston to a filled 10cc 700 series syringe barrel. 2. Push piston down so it sits on top of the liquid level. 3. Push on one side of the inner piston to allow air to escape and ensure the piston moves down without restriction. 4. If using our syringe filling station, push piston into the empty syringe barrel and material will transfer into the syringe pushing the piston up as it fills.

The 710007BLPK polyethylene piston is supplied in sealed packs of 30 or in bulk packs of 1000.

Health & Safety in Use

The 710007BLPK pistons are safe and hygienic, reducing risk of operator contact with the materials being dispensed. This piston inserts easily in the syringe to minimise the risk of repetitive strain injury. For high volume dispensing, we recommend our TS250 pneumatic syringe system rather than manual syringe assemblies.

Benefits

Silicone free plastics

Safe for use to 100 psi

Compatible with most liquids, adhesives and gels

Effective wiper action without drips

Always available from stock

Available as part of pre-filled syringe

Most of our components are available to order from stock. Our web shop provides secure and safe online purchasing. We also offer credit accounts. Please fax us your order to 0845 652 0059.

710007BLPK

10cc Easy Flow PE Piston

7100LL1NPK:

10cc Natural Syringe Barrel

710000CRPK:

10cc Syringe Barrel End Cap

7015LLPK:

Universal Syringe Tip Cap Seal

The data, information and values contained in this Technical Data Sheet have been obtained by specific tests conducted in a controlled environment, and should be used for guidance purposes only. Although we believe them to be reliable and accurate, users should always conduct their own tests in their specific working conditions to ensure that the product is suitable and effective for use. It is the user’s sole responsibility to determine the suitability of the product for the application. Adhesive Dispensing Ltd cannot be held responsible for the results of procedures undertaken elsewhere, nor for the safeguarding of personnel or property, all of which is the duty of the user. Suitability of products or methods is discretionary. Therefore, warrantees or implied usage obligations should not be attributed to, and are not the responsibility of, Adhesive Dispensing Ltd. Adhesive Dispensing Ltd are not liable for any financial loss or other damages incurred by the user as a result of the use of this product. Product dimensions and design are approximate and could be subject to change, without notice.

Adhesive Dispensing Ltd Sales & Service Freephone 0800 094 9058

Willow House 20 Craigmore Ave Milton Keynes, MK3 6HD United Kingdom

Tel +44 (0) 845 652 0058 Fax +44 (0) 845 652 0059

Registered in England & Wales Reg. No 6048283 VAT No. 901 8594 21

info@adhesivedispensers.co.uk www.adhesivedispensers.co.uk

Made with FlippingBook - Online Brochure Maker