Jantz Catalog 51

RASPS - FILES

JANTZ SUPPLY ★ 1-800-351-8900 ★ WWW.KNIFEMAKING.COM

Mill Files

Half Round Files

Taper Files

Triangular shape files taper slightly towards the point. CAT.# STYLE LENGTH PRICE CTN14224 Slim 6" 5.50 CTN14665 Extra 6" 5.50 CTN15024 Double Extra Slim 6" 5.50

Principally used to file circular openings or concave surfaces. Tapered slightly towards point. This file is generally referred to as a rat-tail file. CAT.# LENGTH CUT PRICE CTN11716 6" Bastard 6.95 CTN11748 6" Second Cut 7.95 CTN11781 6" Smooth 8.95 CTN40651 6" 0 Cut 16.95 CTN40645 6" 00 Cut 16.95 CTN11904 8" Bastard 7.95 CTN11936 8" Second Cut 8.95 CTN11969 8" Smooth 9.95 CTN12019 10" Bastard 9.95 CTN12051 10" Second Cut 11.95 CTN12084 10" Smooth 12.95 Enlarged close-up shows the unique pattern of narrow chip breakers created by steep and angled serrations. This maximum cutting surface design gives rapid removal and smoother finish. “Magicut” is a machinist’s all purpose file, which removes stock rapidly and leaves a smooth finish at the same time, thus eliminating the need for extra filing strokes. CAT.# LENGTH PRICE CTN07894 8" 10.95 CTN07917 10" 13.95 CTN07941 12" 17.95 Round Files Flat files are used by machinists, machinery builders, ship and engine builders, repair men and others who require rapid removal of metal. They are rectangular in cross section and taper slightly towards point in width. Double-cut on both sides, single-cut on both edges. CAT.# LENGTH CUT PRICE CTN03566 8" Bastard 10.50 CTN03599 8" Second Cut 11.50 CTN03632 8" Smooth 11.95 For sharpening mill or circular saws. Also for draw-filing and finishing metals. All sizes tapered slightly in width. Two square edges. Single-cut on sides and edges. This is the most used file in the industry and is usually considered a general purpose file. CAT.# LENGTH CUT PRICE DX32368 4" Bastard 5.50 CTN08354 6" Bastard 5.95 CTN08385 6" Second Cut 8.50 CTN08416 6" Smooth 8 . 95 CTN08497 8" Bastard 6.95 CTN08529 8" Second Cut 9.50 CTN08560 8" Smooth 10.50 CTN08642 10" Bastard 8.95 CTN08673 10" Second Cut 11.95 CTN08704 10" Smooth 12.50 CTN08737 12" Bastard 13.95 CTN08768 12" Second Cut 14.95 CTN08799 12" Smooth 16.50 Flat Files Magicut Files

Rounded on one side. Flat on the other. Used on concave and convex as well as flat surfaces. Backs of all half round bastard files are double-cut. The backs of all half round second cut files longer than 6" are double- cut, the 6" files are single-cut. The flat sides of all half round files are double-cut. CAT.# LENGTH CUT PRICE CTN04795 6" Bastard 12.50 CTN04828 6" Second Cut 13.50 CTN04861 6" Smooth 14.25 CTN04896 8" Bastard 14.75 CTN04927 8" Second Cut 16.50 CTN04960 8" Smooth 17.50 CTN04995 10" Bastard 17.95 CTN05026 10" Second Cut 19.95 CTN05059 10" Smooth 21.95

Warding Files

Thin rectangular shape, double cut on sides, single cut on edges. Use in narrow spaces where other files will not fit. CAT.# LENGTH CUT PRICE CTN16761 8" Bastard 13.50 CTN16794 8" Second 14.95 CTN16827 8" Smooth 16.95

Wood Rasps

Square Files

For filing slots, keyways and general surface filing. Tapered slightly towards point. Double cut. CAT.# LENGTH CUT PRICE CTN13081 8" Bastard 10.95 CTN13114 8" Second Cut 12.50 CTN13147 8" Smooth 13.50

Great for the rapid removal of wood. CAT.# LENGTH

PRICE

CTN19427

19.95

10" Half Round Bastard

4 -In-Hand

Long Angle Lathe File

This versatile tool is really four in one - with a file section and a rasp section on the flat side and a file section and a rasp section on the half round side. Every homeowner, garage man, boat builder and mechanic needs one. CAT.# LENGTH PRICE CTN18924 8" 12.95

This new round smooth chain saw file is a product of extensive research and development in the engineering laboratories of Nicholson. This new round smooth chain saw file is the smoothest-feeling, fastest- cutting and best-finished. CAT.# LENGTH DIAMETER PRICE CTN01576 6" 1/8" 4.50 CTN01630 6" 5/32" 4.50 CTN01765 8" 3/16" 4.50 CTN01888 8" 7/32" 4.50 CTN01974 8" 1/4" 4.50 Pattern maker's cabinet rasps. Narrow pattern. These are the rasps stockmakers use the world over for their shape and outstanding cutting ability. CAT.# LENGTH DESCRIPTION PRICE CTN18846 10" Second cut #49 47.95 CTN18861 10" Smooth #50 55.95 Cut faster than regular mill files and leave a smoother finish. Bastard cut. Edges do not cut. All long angle files are single-cut. CAT.# DESCRIPTION PRICE CTN07688 12" Long Angle Lathe File 21.95 American Pattern Rasps Chain Saw Files

File Cleaning Brush

Nicholson makes this file cleaner, therefore you know it is the finest available. For general cleaning of file teeth, works great even on your finest cut files. Overall length is 10". CAT.# DESCRIPTION PRICE CTN21467 File Cleaning Brush 17.95

File Handle

Nicholson file handle with interchangeable cushion inserts to fit a full range of files. CAT.# DESCRIPTION PRICE CTN21474 File Handle 5.50

Checkering Files

Pillar Files

Parallel in width and gently tapered in thickness. Overcut is parallel to file edges and upcut is 90 degrees to overcut. Used to put a crosscut checkering pattern in metals, Also used in creating thumb grooves on the spine of a blade, known as jimping. CAT.# LINES PER INCH PRICE GNCF00 20 47.95 GNCF0 30 47.95 GNCF1 40 51.95

Pillar files are similar in shape to hand files but only two-thirds as wide. Double-cut on two sides only. Edges do not cut. CAT.# DESCRIPTION PRICE CTN40281 8" X-Narrow 00 Cut 38.95 CTN31238 4" Regular 00 Cut 21.95

PAGE 87

PRICES SUBJECT TO CHANGEWITHOUT NOTICE

Made with