WCN Spring 2014

WCN

Special solutions

commissioning by experienced staff. Among the markets that the company is involved in: the high voltage area delivering a screening line and several sets of take-ups over 100 tons with reels diameter 5m; the fibre optic market delivering an armouring line based on a 30 bobbin tubular with a bulkhead to locate the fibre optic reel; a bow cabler prepared for laying-up of control cables and insulated conductors located in reels diameter 1,600mm, with precise tension control for conductors from 4mm 2 to 185mm 2 . Sister company Flyro deals with used machinery, covering the whole wire and cable industry with a huge inventory. Special offers can be made combining used and new equipment as well as revamped solutions, modernising equipment mechanically and also using updated electrical solutions to achieve better and quicker production. Composed of a skilled and experienced team as well as modern and large facilities, Flymca and Flyro can meet special requirements in the wire and cable industry, matching needs and budget with customised solutions.

S S Catering for the whole wire and cable industry

increasing development over the last years, is one of the Flymca’s key areas of expertise. A huge technical knowledge helps customers to achieve their goals, together with a complete capability that goes from research and development until the final delivery, and an after-sales service going through the whole engineering, manufacturing, assembling, software, quality control as well as installation and thousands of PCD dies are in permanent use. Sooner or later these are subject to wear, needing proper reconditioning for renewed use if drawing efficiency and economy are to be maintained at the highest possible level. For refurbishing the growing quantity of PCD dies, a unique Ultrasonic machine, model ‘USP-Twin’, with two workstations, has been developed by Eder Engineering, Austria. The machine can efficiently work all die-sizes in a range from 0.05mm to 8mm diameter.

Flymca is continuously manufacturing special solutions for stranding/ cabling purposes adapted to the global cable market. Its expertise range covers the complete range of machines for stranding and laying-up of conductors for the power cables field as well as for the steel ropes market. Off-shore, submarine and umbilical cables production is also part of its machines, scope of supply. The stranding technology, under

Flymca & Flyro – Spain Website: www.flymca.com Website: www.flyro.es

Stand 10/H64

Ultrasonic for die efficiency

Eder has been specialising in the field since 1947 and offers a variety of leading equipment for the production and reconditioning of tungsten carbide, natural diamond and PCD dies, as well as technical assistance in the proper processing of drawing dies. All machines are supplied ready for operation and are easy to understand and operate, allowing all users complete in-house independence.

S S The ‘USP Twin’ from Eder Engineering

Eder Engineering GmbH – Austria Email: office@eder-eng.com Website: www.eder-eng.com

With the growing use of multi-wire drawing machines with up to 48 wires drawn on a single machine,

Stand 10/A40-2

5

WCN - www.iwma.org