The UK Offshore Oil and Gas Fabricators Directory 2014

Capabilities and Capacities – Facility 1 Total Area (m²) Not Provided Fabrication Area Covered (m²)

• Assembly hall – 2,340 m 2 (36 metres width x 65 metres length x 45 metres height) with main doors 32 metres width x 32 metres height • Ability to treble the facility with an additional two halls onsite

Assembly and Erection Area (m²)

• Assembly hall – 2,340 m 2 • Approximately 7,500 m 2 available externally, if required

Cranage – Lifting Capacity and Hook Height (Tonnes and Metres) Load-Out Capacity (Tonnes)

Each assembly hall has three Gantry Cranes each complete with: • 2 x 10 tonnes, hook height 33 metres • 1 x 5 tonnes, hook height 33 metres

• 120 metres long, heavy lift quay with circa 4,000 tonnes plus load-out capacity • 33 kilonewtons/m 2 uniformly distributed load, 50 kilonewtons/m 2 bearing piles • Transporter Bridge seaward with an air draught of 48.8 metres (at mean high water springs (MWHS))

Minimum Water Depth (Metres) Maximum Water Depth (Metres) Other e.g. Licences, Permissions, Warehouse and Storage Size, Engineering, Electrical and Joiners Workshop Size, etc. Dry-Dock Capability

Eight metres above lowest astronomical tide (LAT)

13.5 metres (MHWS 5.5 metres)

Not Applicable

Onsite facilities extend to: • Factory space – 15,000 m 2 • Warehousing – 5,000 m 2 • Variable office accommodation

>

page 70

THE UK OFFSHORE OIL AND GAS FABRICATORS DIRECTORY 2014