The UK Offshore Oil and Gas Fabricators Directory 2014

Capabilities and Capacities – Lowestoft Total Area (m²) 55,000 m²

Fabrication Area Covered (m²)

• Fabrication area – 2,640 m 2 • Paint shop – 1,539 m 2 • Two pipe workshops, plate cutting shop, saw shop

Assembly and Erection Area (m²) Cranage – Lifting Capacity and Hook Height (Tonnes and Metres)

25,300 m²

• 1 x 350 tonnes (mobile) • 2 x 150 tonnes (mobile) • 1 x 45 tonnes (mobile) • 4 x 10 tonnes (Gantry Cranes)

Load-Out Capacity (Tonnes)

• 2 x 6,000 tonnes capacity load-out quays (largest recent load-out 4,300 tonnes) • Nominal ground bearing pressure – 10 tonnes/m 2 - 35 tonnes/m 2

Minimum Water Depth (Metres) Maximum Water Depth (Metres) Other e.g. Licences, Permissions, Warehouse and Storage Size, Engineering, Electrical and Joiners Workshop Size, etc. Dry-Dock Capability

4.5 metres lowest astronomical tide

6.95 metres mean high water springs

Not Applicable

• 5,659 m 2 of covered storage • Harbour entrance 44.7 metres x 4.6 metres deep • Offices available • Fabrication tonnage for last five years – 12,000 tonnes • Type of fabrication offered (standards or specifications available): - Structural – EEMUA 158/DNV OS-C401 - Pipework – American National Standards Institute ANSI-B-31.3 (piping for refinery)/Pressure Equipment Directive PED 97.23ec – Si 1999;2001 - Other – Electrical Installation, IEE Regulations 17th Edition/ATEX (Atmosphères Explosibles) Directive • FPAL Registered and Verify Assessed • Achilles JQS Registered • Achilles UVDB Registered and Verify Assessed

>

page 86

THE UK OFFSHORE OIL AND GAS FABRICATORS DIRECTORY 2014