The UK Offshore Oil and Gas Fabricators Directory 2014

Capabilities and Capacities – Facility 1 Total Area (m²) 210,000 m 2

Fabrication Area Covered (m²)

• 8,580 m 2 consisting of four main halls • Additional fabrication area of 1,800 m 2 available for preparation and cutting shop, assembly shop, pipe fabrication shop and stainless steel fabrication shop

Assembly and Erection Area (m²)

• 22,300 m 2 • Additional 14,000 m 2 available if necessary

Cranage – Lifting Capacity and Hook Height (Tonnes and Metres)

• Sheds 1 to 4 – 2 x 30 tonnes (including five tonne auxiliary) per shop, hook height 21 metres • Paint shed – 2 x 10 tonnes • Preparation and cutting shop – 2 x 10 tonnes • Assembly shop – 1 x 16 tonnes • Pipe fabrication shop – 1 x 10 tonnes • Stainless steel fabrication shop – 1 x 5 tonnes • 12 tonne mobile crane and various forklifts • 126 tonne transporter • Additional cranes, self-propelled modular transporters, etc, hired to suit project requirements as necessary

Load-Out Capacity (Tonnes)

14,000 tonnes, 27.5 tonnes/m 2

Minimum Water Depth (Metres)

• 200 metre quay – 3.9 metres lowest astronomical tide (LAT) • Angle load-out quay – 4.5 metres LAT

Maximum Water Depth (Metres)

• 200 metre quay – 9.5 metres mean high water springs (MHWS) • Angle load-out quay – ten metres MHWS

Dry-Dock Capability

Not Applicable

>

page 94

THE UK OFFSHORE OIL AND GAS FABRICATORS DIRECTORY 2014