Catalog FORMAT plus 2017 - 2018

Adapters/drills/keyhole saws and accessories 106

RebarCutter armouring drill

Design: With embedded and individually soldered carbide teeth. The drill also has an integrated ejector aid for simple removal of the armouring from the drill body. The shank has a thread for quick changeover between the armouring drill and hammer drill. Application: For use with SDS-plus ratio adapter, 100 % suitable for hammer drills. Ideal for reinforced concrete with the usual building site armouring. The hammer drill hits armouring. The armouring drill is used and the armouring drilled through. Then the hammer drill is used again and drilling continues. Note: Only cut through armouring with authorisation from a structural engineer.

Cutting Tools 1

1266

∅ mm

Order No. 0120 0140 0160 0180 0200 0250 0280 0300

Drilling depth mm

Total length mm

12 14 16 18 20 25 28 30

97.70 97.70

190 190 190 190 190 190 190 190

230 230 230 230 230 230 230 230

118.00 126.00 129.00 146.50 150.50 159.00 (W119)

Adapter for Ratio Quick hammer drills

Application: For armouring drill RebarCutter (order no. 1266) and Ratio carbide hammer drill (order no. 1276) in SDS-plus or SDS-max hammer drills.

1267

Mandrel

Order No. 0010 0020

Length mm

SDS-plus SDS-max

37.20 37.20 (W119)

108 185

Multi-purpose keyhole saw Allmat

Design: High drill bit with sturdy base and ground carbide teeth on all sides, which can be sharpened. The clamping area is large and therefore ensures quick drill dust removal without sticking. Drilling residues are also easy to remove. Max. drilling depth 65 mm. Application: Ideal for installation of sockets and junction boxes. Torsion-free drilling is guaranteed and sockets are countersunk in one step due to the high and sturdy drill body. The partially ground teeth prevent burning when drilling in wood. Suitable for a number of materials such as aluminium, insulation, gas concrete, plasterboard, wood and sandstone. For use on machines with SDS-plus and hexagon shank.

1275

∅ mm

Order No. 0680 0820

Area of use

68 82

33.90 43.60 (W121)

Switch boxes Junction boxes

Mount shank Allmat

Application: Multi-purpose keyhole saw Allmat (order no. 1275).

1275

Mandrel

Order No. 0050 0055

Hexagonal SDS-plus

10.65 10.65 (W121)

Centre drill Allmat

Design: Centre drill in sturdy design for fast and safe drill start on all surfaces. To suit mount shank (order no. 1275).

1275

∅ mm

Order No. 0010

Length mm

8

4.80

100

(W121)

1/88

Made with FlippingBook - professional solution for displaying marketing and sales documents online