Catalog FORMAT plus 2017 - 2018

Drilling tools

39

Spiral drill with cyl. Shank

Continued

&DVWLURQ PDWHULDOV f mm/rev

&DVWLURQ PDWHULDOV f mm/rev

1004

1004

∅ h8

∅ h8

Order No.

PU

Order No.

PU

Spiral length mm

Total length mm

Spiral length mm

Total length mm

Cutting Tools 1

mm 13.2 13.5 13.8 14.0 14.2 14.5

mm

TiN

TiN

1320 1350 1380 1400 1420 1450

42.00 40.60 45.50 39.60 49.00 43.00 (W100)

1480 1500 1520 1550 1580 1600

14.8 15.0

64.60 46.50 57.30 53.40 61.90 54.70 (W100)

1 101 151 0.315 1 108 160 0.315 1 108 160 0.315 1 108 160 0.315 1 114 169 0.315 1 114 169 0.315

1 114 169 0.315 1 114 169 0.315 1 120 178 0.315 1 120 178 0.315 1 120 178 0.315 1 120 178 0.315

15.25

15.5 15.8 16.0

Spiral drill set with cyl. Shank

Design: HSS, DIN 338, type N, right cutting, profile grinding, TiN coated surface. Normal angle of rake, core thickness and core gradient. Set consisting of (order no. 1004). Supplied in a robust, high quality plastic cassette with automatic drill setup function when opened.

Type N

TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1029

28

28

22

75

1029

Set contents ∅ h8 mm

Order No.

Number of drills Piece

Increasing

mm 0.1 0.1 0.5

TiN

0001 0003 0005 0007 0009

1.0– 5.9 6.0–10.0 1.0–10.0 1.0–10.5 1.0–13.0

151.50 343.00 107.50 169.50 230.00 (W100)

50 41 19 24 25

0.5 + K.B.*

0.5

* With intermediate sizes for tapped holes: 1 piece each ∅ 3.3; 4.2; 6.8; 10.2 mm.

These Hand tap set are found on Ç 1/164

1/21

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook - professional solution for displaying marketing and sales documents online