Catalog FORMAT plus 2017 - 2018

Drilling tools

92

Solid Carbide spiral drill, SuperLine, 5 x D

Continued

6WHHOV XSWR

1212

1215

1218

1221

∅ d 1 = m7 mm 16.00 16.50 17.00 17.50 18.00 18.50 19.00 19.05 19.50 20.00

Order No.

Spiral length I 2 mm

Shank length I 3 mm

Overall length l 1 mm

Shank ∅ d 2 = h6 mm

1PP

Cutting Tools 1

f mm/rev

Fire

Fire

Fire

Fire

1600 1650 1700 1750 1800 1850 1900 1905 1950 2000

96.00

102.00 163.00 163.00 163.00 163.00

158.00 252.00 252.00 252.00 252.00 274.00 274.00 274.00 274.00 274.00 (W112)

164.00 262.00 262.00 262.00 262.00 284.00 284.00 284.00 284.00 (W112) 284.00 ◊

83 93 93 93 93

48 48 48 48 48 50 50 50 50 50

133 143 143 143 143 153 153 153 153 153

16 18 18 18 18 20 20 20 20 20

0.250 0.315 0.315 0.315 0.315 0.315 0.315 0.315 0.315 0.315

153.00 153.00 153.00 153.00 166.00 166.00 166.00 166.00 (W112) –

176.00 ◊

101 101 101 101 101

176.00

176.00 176.00 (W112)

Solid carbide spiral drill, 5 x D

Design: Solid carbide, DIN 6537 L, type RT 100 VA. TiAIN coated surface, right cutting with special point geometry and cross point thinning. Normal angle of rake, normal core thickness and without core gradient, with internal cooling. The drill has a very good self-centring behaviour and produces short chips. Application: For accurate alignment drilling with very narrow ∅ tolerances and good surfaces. Suitable for drilling holes up to 5 x D with high cutting values. Particularly suitable for cutting stainless steels, titanium and Ti-alloys and special alloys. Note: The drills can be sharpened and recoated several times.

Type RT 100 VA

DIN 6537

Solid carbide

DIN 6535-HA

140°

30°

5xD

3

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1223

80

35

1223

1223

∅ d 1 = m7 mm

∅ d 1 = m7 mm

Order No.

Spiral length I 2 mm

Order No.

Spiral length I 2 mm

Shank length I 3 mm

Overall length l 1 mm

Shank ∅ d 2 = h6 mm

Shank length I 3 mm

Overall length l 1 mm

Shank ∅ d 2 = h6 mm

f mm/rev

f mm/rev

TiAlN

TiAlN

0300 0310 0317 0320 0325 0330 0340 0350 0357 0360 0370 0380 0390 0397 0400 0410 0420 0430 0437 0440 0450 0460 0465 0470 0476 0480 0490 0500

3.00 75.60 3.10 80.60 3.17 80.60 3.20 80.60 3.25 80.60 3.30 80.60 3.40 80.60 3.50 80.60 3.57 80.60 3.60 80.60 3.70 80.60 3.80 80.60 3.90 80.60 3.97 80.60 4.00 82.10 4.10 87.20 4.20 87.20 4.30 87.20 4.37 87.20 4.40 87.20 4.50 87.20 4.60 87.20 4.65 87.20 4.70 87.20 4.76 87.20 4.80 87.20 4.90 87.20 5.00 82.10

28 36 66 28 36 66 28 36 66 28 36 66 28 36 66 28 36 66 28 36 66 28 36 66 28 36 66 28 36 66 28 36 66 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 44 36 82 44 36 82 44 36 82 44 36 82

6 0.080 6 0.080 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100 6 0.100

0510 0516 0520 0530 0540 0550 0555 0556 0560 0570 0580 0590 0595 0600 0610 0620 0630 0635 0640 0650 0660 0670 0675 0680 0690 0700 0710 0714

5.10 87.20 5.16 87.20 5.20 87.20 5.30 87.20 5.40 87.20 5.50 87.20 5.55 87.20 5.56 87.20 5.60 87.20 5.70 87.20 5.80 87.20 5.90 87.20 5.95 87.20 6.00 82.10 6.10 103.50 6.20 103.50 6.30 103.50 6.35 103.50 6.40 103.50 6.50 103.50 6.60 103.50 6.70 103.50 6.75 103.50 6.80 103.50 6.90 103.50 7.00 95.80 7.10 103.50 7.14 103.50

44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 91 44 36 91 44 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91

6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 8 0.125 8 0.125 8 0.125 8 0.160 8 0.160 8 0.160 8 0.160 8 0.160 8 0.160 8 0.160 8 0.160 8 0.160 8 0.160 8 0.160 Continued overleaf

(W117)

(W117)

1/74

Made with FlippingBook - professional solution for displaying marketing and sales documents online