WIRED MAY 2015_8

ASB Sensor Detector

Now in Stock!

A n ASB sealed bearing is fitted in the same way as a conventional type bearing. However, there are certain extra precautions that should be considered during the fitment: With 1st generation bearings, it is essential to fit the ASB seal the correct way: the bearing reference is always marked on the side which has the ASB encoded seal and must be fitted to the inner side of the vehicle. If unsure or to be certain, use an ASB detector card. The fitting of the bearing must be done with the correct tools for removal and replacement so that the encoded seal is not damaged. Storage and transport must also be sufficient, mishandling can cause damage to the seal and

incorrect function of the sensor. Being stored where there is a case of high magnetism can also damage the sensor. The ASB Detector Card allows quick and accurate identification of the ASB encoded seal and correct positioning relative to the sensor. The SNR ASB detector card is shaped to enable use on all types of ASB equipped bearings. Part number – 628 77 0020

For more information on ASB Sensors please contact Sunil Patel: Cisco: 7001 – 169 sunil.patel@eurocarparts.com